020585-00 Briggs and Stratton Pressure Washer - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Nozzle, Qc, Green
Part #195983QGS
Injtr, Detergent 3/8npt
Part #198851GS
This is an authentic OEM part for use with Briggs and Stratton Pressure Washers. The chemical injection connector connects the chemical injector to the pump. This part is sold individually. The most common reasons for replacing the injector kit are when water is getting into the soap dispenser, the chemical injector nozzle is leaking, or ...Read morethe pressure washer soap injector is not working at all. The tools that you will need to replace the chemical injector are pinch-off pliers, 13mm wrench, and a flathead screwdriver.
Read less
Nozzle, Qc, White
Part #195983RGS
This is an original replacement part manufactured for use with pressure washers. This quick change nozzle delivers a 40-¦ angle spray for use with several pressure washing applications. The white quick change nozzle is sold as an individual replacement part.
Nozzle, Qc, Yellow
Part #195983PGS
This is an authentic OEM part designed to fit the pressure washers listed below. This is a yellow chiseling style tip, with a standard fifteen (15) degree spray width. This nozzle is recommended for water only. It is ideal for heavy duty pressure washing of harder surfaces and stubborn stains/grime. This is a very commonly used nozzle so a backup could be handy. Sold individually.
Kit, O-Rings
Part #198847GS
Chemical Injection Kit
Part #192914GS
It is a high-quality item that is supplied by the original equipment for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. The kit includes a fitting that allows a user to connect the hose that supplies the chemical cleaning solution. Unfortunately, over time components on your equipment may wear out or get damaged eve...Read morentually requiring a replacement. Make sure to check the appropriate diagrams and the owners manual of your model for the correct installation of these parts. The kit includes one durable brass fittings, a metal ball, a spring and a rubber seal. To replace it, you will need a wrench set to remove the old fitting and secure the new one.
Read less
Nozzle, Soap
Part #198841GS
This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.
Valve, Fuel
Part #209417GS
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with portable generators. The valve attaches to the bottom of the fuel tank and is used to regulate the fuel that exits the tank. This valve is priced as a single item.
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
Kit, Unloader
Part #198736GS
This is a genuine Briggs and Stratton and Troy-Bilt part for use with Pressure Washers. The unloader valve kit includes the parts needed to replace the unloader valve, which opens to relieve water pressure and recirculate water through the pump when the spray wand isn't in use and the pressure washer is running. The most common reason for...Read more replacing the unloader valve kit is if it is damaged. The tools that you will need to replace the unloader valve is a screwdriver, pliers and a Wrench Set.
Read less
Mount, Vibration
Part #21217GS
This is a genuine replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers from Briggs & Stratton and Snapper. The vibration mount fits between the engine and the frame assembly and is used to reduce vibration between the motor and frame. This item is sold as an individual replacement part.
Switch-key
Part #692318
This part is an OEM from Briggs & Stratton. The switch and key is compatible with many small engines. This ignition component is sold individually, and includes a washer, nut, decal and key set. Please refer to specific manual and diagrams for making the repair. A screwdriver, pair of pliers and a wrench set are often necessary for the installation.