01903-0 Briggs and Stratton Pressure Washer - Parts

The breather tube kit is sold as a set that contains all the necessary parts. They are made out of plastic and metal. When replacing these items a screwdriver may be needed. They may become broken and will need to be replaced. These are Briggs & Stratton and Troy-Bilt replacement parts directly sourced from the manufacturer for use in pressure washers.

The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.

This is an authentic Briggs & Stratton replacement part manufactured for use with pressure washers. The seals are used with the brass head on the pump. This seal set kit is sold as an individual replacement part.

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

This manufacturer-approved oil is commonly used in pressure washers. It is made to lubricate the internal pump drive components. This plastic bottle contains 5.3 fluid ounces of oil. It is recommended to wear work gloves to protect your hands when replacing the pump oil. You may need to purchase this item if you run out of oil or your bottle is damaged.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

This part is a genuine replacement wand for use with Troy-Bilt, Snapper and Briggs and Stratton pressure washers. It is an identical replacement for a faulty or a missing part that was included with a new unit. One reason you would need to replace the extension is that the threads on the couplings can strip out over time. Another common p...Read moreroblem is freeze damage to the fittings. If liquid is left in the sprayer during the winter it can freeze. The frozen liquid will expand, causing the fittings to split and then leak. Keep in mind this high-quality extension is sold as an individual item. Refer to the owner's manual for your equipment to ensure the proper application.

This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.