Microwave Elements and Burners

This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear of the oven. This is a genuine OEM bake element. Please remember to disconnect the power to your range before you start your repair.

Restore baking heat with this 240 volt oven element. It installs at the bottom of the oven and heats food during the bake cycle. A damaged element may not heat, may heat unevenly, or may show burns and breaks. Disconnect power at the circuit breaker before installation. Use the exact model number to confirm fit.

This bake element is a high-efficiency replacement part designed to fit select electric ovens. Positioned at the bottom of the oven cavity it delivers consistent heat distribution for reliable baking performance. Emitting 2300 watts of power it ensures even cooking temperatures throughout the cycle. If your oven is struggling to maintain heat or bake evenly replacing the element may restore proper function. Installation should be done with caution—always unplug the appliance and refer to your owner's manual for detailed instructions. While similar in appearance bake elements can vary slightly in size and shape so confirm compatibility with your model before purchasing. Sold individually.

This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not baking your food at an even temperature. This could be due to the element being burnt out or broken. Make sure to unplug the oven before you begin. You will need to remove the oven from the wall to complete this repair. This is an OEM part that comes right from the manufacturer, ensuring the best quality.

If your oven isn’t heating properly or your food isn’t baking evenly, this bottom heating element might be the issue. It provides steady heat for baking and roasting and fits select Bosch, Thermador, and Gaggenau models. Swapping it out is a simple way to get your oven working like new again—just be sure to unplug it first and check that it matches your model.

This hidden bake element is an essential heating component located beneath the oven floor panel, providing consistent heat for baking, roasting, and warming. Designed with a durable ceramic sheath to protect the heating coil, it ensures reliable performance and even temperature distribution. The element measures approximately 13 to 13.3 inches in width and 11 inches in depth, making it a perfect fit for standard oven cavities. If your oven is producing little or no heat, baking unevenly, or showing visible damage such as cracks or blistering, replacing the bake element can restore optimal functionality. Installation is straightforward—simply disconnect power, remove the floor panel, and replace the element with the new one.

If your oven isn’t broiling properly or heating from the top, this broiler element might be the fix. It’s the part that gives off heat for broiling and is built to handle high temperatures. It’s easy to install—just make sure to turn off the power first. Check your model number before ordering to make sure it fits.

This hidden bake heating element provides the primary heat source for baking in electric wall ovens and ranges. Concealed beneath the oven floor, it delivers even heat distribution while allowing for easier cleaning of the oven cavity. Rated at 1450 watts, this durable element is designed for 27-inch built-in ovens and compatible appliance types, including wall ovens, microwave/oven combos, and electric ranges. Common signs of a failing element include weak heating, uneven baking, or the oven not heating at all. Installation is straightforward and can typically be completed with basic tools.

This bake element is of a fully open fixed style and is used for electric ranges and ovens. Carrying 240 volts and 2800 watts, it is 15-1/4 inches wide and 15-1/2 inches long. The depth of the terminals is 2-1/2 inches, making a total element length of eighteen inches.

This broil element delivers powerful radiant heat for broiling, searing, and browning food inside your oven. Positioned at the top of the oven cavity, it operates at 3400 watts and 240 volts to ensure fast, even heating during broil cycles. A genuine OEM replacement, this element is ideal for restoring performance when your oven produces no heat, insufficient heat, or uneven heat while broiling. Installation is simple—disconnect power, remove the old element, and secure the new one in place for reliable operation.