Maytag Washer Hoses and Tubes

Videos!

Your Price

$33.95

Maytag Washer Drain Hose

★★★★★

4 Reviews

PartSelect Number PS12578897

Manufacturer Part Number W11244231

The drain hose carries used water from the washer to your house drain.

Fixes these symptoms

Draining Issues
Leaking
Will not drain
See more...

Videos!

Your Price

$28.25

Maytag Washer Rubber Injector Valve

★★★★★

18 Reviews

PartSelect Number PS11738945

Manufacturer Part Number WP216201

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.

Fixes these symptoms

Leaking
See more...

Videos!

Your Price

$13.95

Maytag Washer Plastic Injector Nozzle

PartSelect Number PS11738878

Manufacturer Part Number WP213015

This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.

Fixes these symptoms

Leaking
See more...

Videos!

Your Price

$38.45

Maytag Washer Tub-to-pump Hose

★★★★★

3 Reviews

PartSelect Number PS11765836

Manufacturer Part Number W10899966

The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands

Fixes these symptoms

Leaking
See more...

Videos!

Your Price

$28.55

Maytag Washer Water Inlet Hose

★★★★★

3 Reviews

PartSelect Number PS11741209

Manufacturer Part Number WP3357328

This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.

Fixes these symptoms

Leaking
See more...

Videos!

Your Price

$102.52

Maytag Washer Injector Hose W/air Gap

★★★★★

14 Reviews

PartSelect Number PS11738785

Manufacturer Part Number WP206680

This kit contains a top mounting style injector sleeve. It comes with an air gap as well. This part helps stop the contaminated water from being drawn back into the main water line.

Fixes these symptoms

Leaking
See more...

Videos!

Your Price

$45.31

Maytag Washer Hose

★★★★★

32 Reviews

PartSelect Number PS12723931

Manufacturer Part Number W11366249

This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens you will notice water leaking onto the floor. The tub-to-pump hose is found below the washer tub. To disconnect the hose, you will need to release the clamps that hold it in place with a pair of pliers. When you replace the tub hose, you will need to transfer the ball, air chamber, and clamps from the old pump to the new one. To do this, you will need a set of wire cutters and a new zip tie to replace the one you will need to cut.

Fixes these symptoms

Leaking
Will not drain
See more...

Videos!

Your Price

$37.24

Maytag Washer Syphon Break Elbow Kit With Clamp

★★★★★

8 Reviews

PartSelect Number PS2017573

Manufacturer Part Number 208847

Ensure your washing machine drains properly with this siphon break elbow kit, which connects the internal drain pipe to a 7/8" external hose. The elbow design creates a high point in the drain line, breaking the siphon effect and preventing wastewater from re-entering the tub. Ideal for addressing drainage problems or leaks, the kit includes a clamp for a secure fit and is easy to install. Always confirm hose size compatibility before installation.

Fixes these symptoms