Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian P - January 23, 2023
Verified Purchase
Rats love these parts!
This part ( and 2 other parts ordered at same time) lasted 3 weeks after which rats/mice ripped them apart. Should make part taste awful to rodents. I'm trying to stop the rodents. Brian
★★★★★
★★★★★
Tyler L - September 18, 2021
Verified Purchase
Easy repair, saved hundreds!
The tub to pump hose worked great - no more leaks! A very simple fix ended up saving me hundreds of dollars, and extended the life of my washer that was purchased in 2009. The quick video is a great guide on how to access the hose easily. With the right tools, re/re only took 10 minutes.
★★★★★
★★★★★
Timothy Y - May 14, 2021
Verified Purchase
Easy to install. Worked as expected.
I got the parts within 2 days. Good customer service
★★★★★
★★★★★
Daniel B - April 29, 2020
Verified Purchase
Easy Repair Worked as expected
Replacing this is super easy, I'd recommend not following most instructions and removing the case to do it. I did and it was way more difficult to reassemble the case than install the part. You can easily tip the washer up and access it from underneath without taking anything else apart.
★★★★★
★★★★★
Sheila D - July 11, 2019
Verified Purchase
Easy repair fast delivery
Appliance repair shop quoted $50 for hose and two weeks for arrival. Had part exactly 24 hours after ordering and installed in less than 15 minutes
★★★★★
★★★★★
Piotr P - January 23, 2019
Verified Purchase
washing machine hose
Excellent service. Super fast delivery. Thank you
★★★★★
★★★★★
Reggy O - September 22, 2018
Verified Purchase
Perfect.
Came fast,easy to install,no more leaking!Yeah!Why buy a new washer machine ,when you can fix it!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Two leaking hoses in my washing machine
Put the machine on its side. Remove old hoses and screw new ones into place. Done in under 20 minutes.
Put clamps on hose end and then used some dishsoap on the inside of the hose to make pushing them into place easier once in place I placed the clamp in correct spot and used a screwdriver to tighten the clamps.
I pulled the hose off and notice their was a part # and I went online and type the part # and showed the part and cost. I order it and receive it within 3days. when the part arrive I replace the hose in minutes. If I can do so can you its that easy.
Other Parts Used:
eddie from lockesburg, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very little hot water was the problem
I followed the video you guys sent me. You guys and woman are the best!
changed both hoses (inside the washer unit) and noticed evidence of water stains on the small pump housing. Ordered a new one and installed hoses and new pump. Works great now - no leaks, all good. As a comment, getting the "box" back on around the washer was the most cumbersome part of the task. I did it alone, but having a helper steady the one of the sides would be helpful. Getting the cover situated on the frame at the bottom correctly is paramont. Best wishes!
Tried to follow videos. Couldn't figure how to raise top. Laid machine on front used pliers to unclip bracket and clips holding hose. Took 10 minutes to work it this way.
Other Parts Used:
michael from BURBANK, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gwendolyn
November 21, 2018
The hose on my machine isn't long enough to reach my sink, the hose is on the left side of my washer and my sink is more to the right, so water splatters on the floor from the sink, so i feel if i had a longer hose it would stop the splatter. So i want to know if you have a longer hose than what comes with the washer.
For model number 110.24832200
Hello Gwendolyn, Thank you for the question. The longest hose Kenmore has listed is 6 feet, PartSelect Number PS386511. The hoses are sold individually. Thank you for your inquiry, good luck with this repair!
I bought the tub to pump hose and the openings were to wide. The entire tub of water spilled all over the floor. I need a different size hose but this is the only one I've found.
For model number MCSTCW21W2
Hello Elizabeth, Thank you for the question. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.
