My Orders
Maytag Range Igniters
GET YOUR OFFICIAL Maytag PARTS TO ENSURE VICTORY
Popular Maytag Range Igniters
If your oven isn’t heating properly or the flame seems weak, this igniter might be the fix. It helps start the oven by glowing and lighting the gas so you can bake and broil as usual. It works with many brands like Whirlpool, Maytag, and Kenmore. To install, just unplug the oven, turn off the gas, and swap out the old igniter—just be gentle, as it’s a delicate part.
If your oven isn’t heating properly or the flame seems weak, this igniter might be the fix. It helps start the oven by glowing and lighting the gas so you can bake and broil as usual. It works with many brands like Whirlpool, Maytag, and Kenmore. To install, just unplug the oven, turn off the gas, and swap out the old igniter—just be gentle, as it’s a delicate part.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
This part helps your gas oven light properly. It creates the spark that ignites the burner and works with the safety valve to make sure everything runs safely. If your oven isn’t heating, only gets a little warm, or the igniter glows but doesn’t light the flame, this part might need replacing. It fits many Whirlpool, KitchenAid, and Maytag ranges and is built to last. Be sure to turn off the power and gas before installing.
This part helps your gas oven light properly. It creates the spark that ignites the burner and works with the safety valve to make sure everything runs safely. If your oven isn’t heating, only gets a little warm, or the igniter glows but doesn’t light the flame, this part might need replacing. It fits many Whirlpool, KitchenAid, and Maytag ranges and is built to last. Be sure to turn off the power and gas before installing.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
This part helps your gas oven heat up by lighting the burner. If it’s glowing but not lighting the flame, it’s probably time for a replacement. It’s a flat-style igniter with a ceramic base and comes with a connector for easy setup. Be sure to unplug your oven and turn off the gas before installing.
This part helps your gas oven heat up by lighting the burner. If it’s glowing but not lighting the flame, it’s probably time for a replacement. It’s a flat-style igniter with a ceramic base and comes with a connector for easy setup. Be sure to unplug your oven and turn off the gas before installing.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
This broil igniter assembly comes with its own metallic mounting bracket and an seven inch long dual wire lead with a plastic plug.
This broil igniter assembly comes with its own metallic mounting bracket and an seven inch long dual wire lead with a plastic plug.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters.
This flat style oven igniter kit is a genuine replacement component designed for use in gas ovens and ranges. It plays a critical role in the ignition process by generating the heat required to open the gas valve and ignite the burner assembly. Suitable for both bake and broil functions, this igniter can replace short and long flat-style igniters but is not compatible with round-style models. If the igniter glows for more than 90 seconds without lighting the burner, or glows only orange or red instead of white-hot, it may be too weak to activate the gas valve and should be replaced. The kit includes the igniter, ceramic wire nuts, insulation pad, metal mounting bracket, multiple plug ends, and an instruction sheet. The igniter body measures approximately 3 ¾ inches, with an internal element
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also replace short igniters.
This flat style oven igniter kit is a genuine replacement component designed for use in gas ovens and ranges. It plays a critical role in the ignition process by generating the heat required to open the gas valve and ignite the burner assembly. Suitable for both bake and broil functions, this igniter can replace short and long flat-style igniters but is not compatible with round-style models. If the igniter glows for more than 90 seconds without lighting the burner, or glows only orange or red instead of white-hot, it may be too weak to activate the gas valve and should be replaced. The kit includes the igniter, ceramic wire nuts, insulation pad, metal mounting bracket, multiple plug ends, and an instruction sheet. The igniter body measures approximately 3 ¾ inches, with an internal element
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This top burner igniter comes with a mounting bracket.
This top burner igniter comes with a mounting bracket.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
This oven bake igniter is for gas ovens with Direct Spark Ignition (DSI). It ignites the gas to light the bake burner. Before installation, turn off the house circuit breaker and gas supply. Wear gloves for protection and verify compatibility with your model before ordering.
This oven bake igniter is for gas ovens with Direct Spark Ignition (DSI). It ignites the gas to light the bake burner. Before installation, turn off the house circuit breaker and gas supply. Wear gloves for protection and verify compatibility with your model before ordering.
What this part fixes:
- Gas igniter glows, but will not light
- Little to no heat when baking
- Will Not Start
This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
Struggling with a misbehaving range burner that wont light up? Hang tight, weve got just the solution: the Whirlpool Surface Burner Spark Igniter. This is an authentic, OEM part, designed specifically to revive the spark in your range burner. Heres the real deal about this simple yet crucial component: It is responsible for generating that initial spark that gets your burner going. And yes, its a dependable Whirlpool product, ensuring your range is back on track in no time. Dont worry about matching it up with your appliance. This trusty igniter pairs smoothly with certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef ranges, ovens, and stoves. Remember, safety first! Please unplug your range and turn off your gas supply before the installation. We also recommend wearing work gloves for added protection. Breathe new life into your stovetop with the Whirlpool Surface Burner Spark Igniter - and get back to preparing your favorite meals in no time.
Struggling with a misbehaving range burner that wont light up? Hang tight, weve got just the solution: the Whirlpool Surface Burner Spark Igniter. This is an authentic, OEM part, designed specifically to revive the spark in your range burner. Heres the real deal about this simple yet crucial component: It is responsible for generating that initial spark that gets your burner going. And yes, its a dependable Whirlpool product, ensuring your range is back on track in no time. Dont worry about matching it up with your appliance. This trusty igniter pairs smoothly with certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef ranges, ovens, and stoves. Remember, safety first! Please unplug your range and turn off your gas supply before the installation. We also recommend wearing work gloves for added protection. Breathe new life into your stovetop with the Whirlpool Surface Burner Spark Igniter - and get back to preparing your favorite meals in no time.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.
You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking