Hotpoint Dishwasher Spray Arms | Replacement Parts & Accessories | PartSelect

Popular Hotpoint Dishwasher Spray Arms

Lower Spray Arm Base – Part Number: WD12X10244
Your Price
CAD$33.42
Lower Spray Arm Base
PartSelect Number PS1765974
Manufacturer Part Number WD12X10244
This part fits just under the fine filter assembly and supports the lower spray arm.
Fixes these symptoms
Not cleaning dishes properly
Not draining


Lower Spray Arm – Part Number: WD22X10055
Your Price
CAD$42.25
Lower Spray Arm
PartSelect Number PS1765984
Manufacturer Part Number WD22X10055
This is a replacement lower wash arm assembly for your dishwasher. The lower spray arm is mounted to the bottom of your dishwasher tub and will rotate and spray water during the wash cycle. The spray arm has small holes that spray the water, and these can become clogged with debris and hard water buildup inside your dishwasher. The spray arm can also become jammed if silverware falls into the main tub during the cycle. These problems can cause the spray arm to malfunction, which will result in your dishes coming out of the dishwasher unclean. This part is made of white plastic and is sold individually.
Fixes these symptoms
Not cleaning dishes properly


Lower Spray Arm - Gray – Part Number: WD22X10047
Your Price
CAD$123.25
Lower Spray Arm - Gray
PartSelect Number PS1020205
Manufacturer Part Number WD22X10047
The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approximately 20 inches in width. The lower spray arm will not spin if it has become clogged with debris and hard water deposits from your dishwasher, if it has become jammed by silverware, causing it to melt, or if the bottom of the spray arm has become disconnected from the bottom of the tub. If the spray arm encounters any of these issues, it will need to be replaced. To replace the spray arm, remove the lower dish rack and simply unscrew the old arm. Screw the new spray arm in until it locks into place.
Fixes these symptoms
Noisy
Not cleaning dishes properly


Fine Filter Hub Nut – Part Number: WD12X10061
Your Price
CAD$13.61
Fine Filter Hub Nut
PartSelect Number PS259078
Manufacturer Part Number WD12X10061
This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub nut, and it connects the lower spray arm to the hub. If the hub nut breaks, it can cause the spray arm to wobble during operation and this can result in a strange noise. To replace this part, first remove the spray arm by turning it counter clockwise, then do the same with the hub nut. Install the new hub nut by turning it counter clockwise, then replace the lower spray arm. This part is sold individually and is an OEM part from the manufacturer.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Middle Spray Arm – Part Number: WD22X10046
Your Price
CAD$72.88
Middle Spray Arm
PartSelect Number PS1015640
Manufacturer Part Number WD22X10046
Your dishwasher’s middle spray arm is connected to the top dish rack, and moves the water around to clean the dishes. If your dishwasher is noisy, or it is not cleaning the dishes properly, you may need to replace the middle spray arm. You should also replace the part if the holes on the spray arm are clogged, or the arm itself is cracked or broken. To replace the middle spray arm, simply unscrew the old spray arm and screw in the new one. This part is sold individually and is made of white plastic. It is approximately 20 inches in width.
Fixes these symptoms
Noisy
Not cleaning dishes properly


 SCR B-16 HXW 1/2 Stainless Steel – Part Number: WD02X10169
Your Price
CAD$8.47
SCR B-16 HXW 1/2 Stainless Steel
PartSelect Number PS2370492
Manufacturer Part Number WD02X10169
This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.
Fixes these symptoms
Noisy
Not cleaning dishes properly


Lower Spray Arm with Tower – Part Number: WD22X154
Your Price
CAD$56.84
Lower Spray Arm with Tower
PartSelect Number PS260603
Manufacturer Part Number WD22X154
This part comes with a three section power tower spray nozzle.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Pump To Wash Arm Rubber Connector – Part Number: WD18X214
Your Price
CAD$25.89
Pump To Wash Arm Rubber Connector
PartSelect Number PS259558
Manufacturer Part Number WD18X214
This connector has female threads.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Lower Spray Arm Bearing
PartSelect Number PS258123
Manufacturer Part Number WD01X10107
This part is a replacement lower spray arm bearing for your dishwasher. It is made of gray plastic and is approximately ½ inch in diameter. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or the dishwasher is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.
Fixes these symptoms
Noisy
Not cleaning dishes properly


Lower Spray Arm and Support Assembly
PartSelect Number PS260529
Manufacturer Part Number WD22X10008
This part comes with the telescopic tower.
Fixes these symptoms
Leaking
Not cleaning dishes properly