Gibson Refrigerator Ice Makers

Videos!

Your Price

$245.70

Gibson Refrigerator Ice Maker Assembly

★★★★★

19 Reviews

PartSelect Number PS12364147

Manufacturer Part Number 241798231

This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Fixes these symptoms

Clicking sound
Ice maker dispenses too little ice
Ice maker not making ice
See more...

Videos!

Your Price

$151.66

Gibson Refrigerator Replacement Ice Maker

★★★★★

71 Reviews

PartSelect Number PS2121513

Manufacturer Part Number D7824706Q

This modular ice maker assembly replaces worn-out units to restore ice production in refrigerators. It includes the ice mold and control device but excludes the cover, ice level arm, wire harness, and mounting hardware, which must be reused or ordered separately. Unplug the refrigerator before installation and use work gloves for safety. Check compatibility with your model number before purchase.

Fixes these symptoms

Clicking sound
Doesn’t stop running
Ice maker dispenses too little ice
See more...

Videos!

Your Price

$244.70

Gibson Refrigerator Ice Container And Auger Assembly

★★★★★

1 Review

PartSelect Number PS1991430

Manufacturer Part Number 241860803

This ice container assembly is a genuine OEM replacement part for your refrigerator. This kit includes the container that holds the ice, along with the auger and blades. Replacing this assembly is an easy repair that does not require any tools. First turn the ice maker off, then remove the old container from the freezer. Line up the connector with the auger yoke, then slide the new container into place. The ice maker can be turned back on, and you will be all set.

Fixes these symptoms

Ice maker dispenses too little ice
Ice maker not making ice
Ice maker won’t dispense ice
See more...

Videos!

Your Price

$136.61

Gibson Refrigerator Replacement Ice Maker

★★★★★

8 Reviews

PartSelect Number PS735469

Manufacturer Part Number 5303918277

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Leaking
See more...

Videos!

Your Price

$63.35

Gibson Refrigerator Ice Dispenser Drum

★★★★★

3 Reviews

PartSelect Number PS1526412

Manufacturer Part Number 241685101

This genuine replacement ice dispenser drum is designed for use with a wide range of refrigerator models. Made from durable plastic, the drum plays a key role in your ice maker by capturing ice and directing it to the crusher for dispensing. It is positioned between the ice dispenser drive plate and the ice crusher mounting plate, ensuring smooth and efficient operation. If the drum becomes damaged or worn, replacing it is a simple process. All you’ll need is a Phillips head screwdriver. Just remove the necessary components to access the drum, unfasten it, and install the new one in its place. This part is sold individually and is compatible with many refrigerator models—check your model’s diagram to confirm fit.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
See more...

Videos!

Your Price

$122.72

Gibson Refrigerator Ice Container/bucket

★★★★★

2 Reviews

PartSelect Number PS1526586

Manufacturer Part Number 241734001

This genuine OEM ice container, also known as an ice bucket, is designed for use in refrigerators to store ice cubes. It should be replaced if it develops significant cracks or breaks that could affect performance. To remove the container, open the freezer door and lift it out, ensuring the ice maker’s shut-off arm is in the off position. Transfer the front panel, access door, shield, crusher assembly, and auger assembly from the old container to the new one—without disassembling the crusher and auger assembly, if possible, to simplify the process. When aligning the control rod, make sure one set of crimps sits in front of the crusher assembly plate and the other behind it. To secure the other end, hook the spring around the tab at the bottom of the container and tuck the bracket behind the tab. Engage the rod’s hook by rotating it into the flapper door. Reinstall the front panel and access door by aligning the holes and fastening them in place. Finally, snap the guard back onto the side rails of the bin, ensuring the ridged edge faces forward. Please note that this replacement part includes only the ice bucket; additional components must be purchased separately.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Leaking
See more...

Videos!

Your Price

$86.85

Gibson Refrigerator Ice Dispenser Solenoid

★★★★★

2 Reviews

PartSelect Number PS8691994

Manufacturer Part Number 241675704

The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
See more...

Videos!

Your Price

$90.29

Gibson Refrigerator Dispenser Crusher Housing

★★★★★

5 Reviews

PartSelect Number PS2378689

Manufacturer Part Number 241885001

This dispenser crusher housing, also known as a refrigerator ice crusher housing, is a genuine replacement part compatible with various refrigerator models. It functions as a protective cover for the ice crushing blades located within the ice container. To complete this repair, you’ll need a Phillips screwdriver, a flat-blade screwdriver, a 1/4-inch nut driver, and a pair of channel lock pliers. Wearing work gloves is recommended for safety. Please note that the replacement part may differ in appearance or color from the original, but it is designed to fit and function exactly the same.

Fixes these symptoms