General Electric Washer Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Washer Hardware
Your Price
$11.49
D-Shaped Knob Clip
PartSelect Number PS268493
Manufacturer Part Number WH01X10106
Sold individually.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$11.80
Tub Bearing Washer
PartSelect Number PS271509
Manufacturer Part Number WH2X1197
Fixes these symptoms
- Leaking
- Will not agitate
- See more...
Your Price
$11.96
Timer Knob Clip
PartSelect Number PS270835
Manufacturer Part Number WH1X2117
Fixes these symptoms
- Touchpad does not respond
- Will Not Start
- See more...
Your Price
$11.49
Drain Hose Clip
PartSelect Number PS270508
Manufacturer Part Number WH16X513
This clip holds the drain hose to the back of the washer.
Fixes these symptoms
- Leaking
- See more...
Your Price
$11.73
Hub Washer
PartSelect Number PS271511
Manufacturer Part Number WH2X1199
This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under the washer tub, beneath the split ring. You will need to remove the tub to access it. Before doing so you should disconnect the power and water sources from washer. The washer is made of metal and is a little more than an inch in diameter. It is sold individually, and is an OEM part.
Fixes these symptoms
- Leaking
- Will not agitate
- See more...
Your Price
$28.01
Hub Nut
PartSelect Number PS271505
Manufacturer Part Number WH2X1193
This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is approximately 1.5 inches in diameter. This is an OEM part sourced directly from the manufacturer. You will need a hub nut wrench and some WD40 to loosen the nut and remove it from the agitator shaft.
Fixes these symptoms
- Leaking
- Will not agitate
- See more...
Your Price
$10.89
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect Number PS258461
Manufacturer Part Number WD02X10067
Sold Individually.
Fixes these symptoms
- Noisy
- Not cleaning dishes properly
- See more...
Your Price
$16.47
Screw
PartSelect Number PS417463
Manufacturer Part Number 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Screw-In Plastic Leveling Leg
PartSelect Number PS1152204
Manufacturer Part Number 134548800
Sold individually.
Your Price
$11.80
Compression Ring
PartSelect Number PS652828
Manufacturer Part Number WH02X10093
Used in conjunction with the timer dial knob assembly.
Fixes these symptoms
- Will Not Start
- See more...
Related Parts
- All General Electric Washer parts
- General Electric Washer Agitators
- General Electric Washer Belts
- General Electric Washer Caps and Lids
- General Electric Washer Circuit Boards and Touch Pads
- General Electric Washer Dispensers
- General Electric Washer Drums and Tubs
- General Electric Washer Hinges
- General Electric Washer Hoses and Tubes
- General Electric Washer Knobs
- General Electric Washer Latches
- General Electric Washer Motors
- General Electric Washer Pumps
- General Electric Washer Seals and Gaskets
- General Electric Washer Springs and Shock Absorbers
- General Electric Washer Switches
- General Electric Washer Timers
- General Electric Washer Valves