Admiral Freezer Parts

This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.

This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

This gasket is used on vertical freezers. Screws are no longer included.

This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit a defrost cycle only when the temperature is below a preset temperature

Keep cold air contained with a replacement freezer door or lid gasket. A damaged seal can allow moisture inside, leading to frost, temperature changes, and longer cooling cycles. First, clean the existing gasket and cabinet edge, then check for gaps or hardened sections. Make sure the lid is aligned correctly because loose hinges can also prevent a proper seal. Verify compatibility using the full appliance model before purchase. Disconnect electrical power before replacement. If the new gasket arrives folded, soften it with warm water or gentle heat. Avoid overheating the material. Install it evenly, close the lid, and inspect the entire seal for gaps.

This defrost heater part number W11175809) is for refrigeration appliances. The defrost heater melts frost from the evaporator fins during the automatic defrost cycle. Safely store any food that could deteriorate while the power is off and unplug the appliance before installing this part. Wear work gloves to protect your hands.