Maytag/Maytag_Thumb/11776.gif
See part 31 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Light Bulb - 120V 25W

★★★★★
★★★★★
2 Reviews
$13.32   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747806
Manufacturer Part Number WPA3073101
Manufactured by Whirlpool
Product Description

Light Bulb - 120V 25W Specifications

This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Freezer, Microwave, Wall Oven.
This part works with the following products:
Amana, KitchenAid, Whirlpool, Maytag.
Part# WPA3073101 replaces these:
AP6014564, 0044462, 0056371, 040672-01, 040672-04, 040672-05, 045606-01, 05200256, 09100073, 14200025, 14205551, 14206369, 14218316, 14218317, 14218659, 14218667, 20174-1, 20174-2, 20174-3, 20174-4 ... Show more , 20174-5, 2223678, 2309101, 2326255, 24836P01, 4164470, 4174873, 4312826, 4358971, 4713-001172, 4713-001197, 52001003, 53001359, 53001773, 54001046, 56001350, 58001043, 58001101, 58001310, 60001060, 61003236, 61004862, 6521, 67006179, 68001062, 8190269, 90051, A3073101, A3079001, A3079001Q, A3079002, A3079003, A3079007, A307901, A3709001, M9D29, R0213161, R0662001, R0812001, R0812005, R0862001, R9900292, W10904371, W10904373, WP2326255, WP61003236, Y0044462, Y0056371, Y04067201, Y04067204, Y09100073 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dale
    September 18, 2017
    I am looking for a two stage light bulb, a high, low for underneath a microwave.
    For model number MMV5156AAS
    Hi Dale, Thank you for your question. That would be this part. Good luck with your repair.

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Bill
    January 8, 2018
    I have a light that is out in the top level of the cabinet. Your web site says it should be part number ps11747806, or control # 19, 25w. However, that bulb does not work. The burned out bulb I took out is 40 watt medium. The 25 w bulb does not fit. Traditional 40 w bulbs from local stores did not work. Or could it be a blown fuse. Everything else inside the refrigerator is functioning normally.
    For model number KSCS25FSBT00
    Hi Bill, Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS884734 for the 40 W bulb. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Darlene
    August 13, 2019
    Trying to replace top inside light bulb ,there are 2 but don't know how to get the bulb out . I tried to turn it but does not turn. Need help
    For model number WSF26C3EXF01
    Hello Darlene, Thank you for the question. Here is a link for a video on installing the bulb. Hope this helps! https://www.youtube.com/watch?v=EHiY1H9fKHE

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Don
    March 18, 2020
    One of two lamps in refrigerator is burned out. The bulb is marked 120v40w. The replacement bulb offered is 120v25w. Is this the only bulb available?
    For model number wsf26c3exf01
    Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Light Bulb - 40W - Part# PS884734.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Martin
    April 16, 2018
    The light under the microwave / above stove is not working , i tried to change the bulb but that did not fix it , it seems that there is power to the socket but it wont light up the bulb
    For model number MMV4205AAB
    Hi Martin, Thank you for your question. If the socket is checking out find, you will need to check the wiring connected to the socket to see if it is fine. You can check it with a multimeter. You should also check the control that allows you to turn the light on to see if there is an issue with that as well. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Moonsamy
    May 30, 2019
    I am looking for a 120v 20w bulb for my KitchenAid freezer. Model is kffs20eyms00
    For model number KFFS20EYMS00
    Hello Moonsamy, thank you for writing. This 120v, 25w Light Bulb part PS11747806 is the only replacement listed for your model. It will function as what was in there already.

    Was this helpful?
    Thank you for voting!
    Pete
    November 24, 2019
    Replacing one of the two bulbs that is on the bottom of this microwave which is attached to the cabinet above. This bulb lights up my electric oven range which sits below the microwave and is burned out. What is the part number for the bulb? Does the bulb have two levels of brightness? What is the volts and wattage of the bulb ?Thank you
    Hello Pete, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11747806 for the 120V 25W Bulb with a Hi Low setting. Hope this helps!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Amana Refrigerator Light Bulb - 120V 25W

      Customer Repair Stories
       Average Repair Rating: 4.5 / 5.0, 8 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        The door was crocked and wouldn't shut properly
        Everything was easy. I read one of your other reviews and it gave me the confidence to try it myself. First i toke off the cap at the top of the door then the three screws. I lifted the door off so i could be sure the cam was my only problem then put the door back on. That took 5 mins. Then I got on the computer and ordered the parts i needed. Two days later the parts arrived and and i took the door off again. Then put the new cam on, applied a litle vasiline, put the door back on and forgot that i ever had a problem. Thanks for the help. Doug Arau
        • Arau from Haverhill, MA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers, Wrench (Adjustable)
        • Parts Used:
          R0181181, WPA3073101, 8009
        41 of 47 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        There was a chattering Noise from Adeptive Defrost Assy
        I first dropped the Cover Assy, which covers lites and controls, this was done by pulling it forward and it drops down, did not remove top shelf so It was a bit difficult to tilt cover assy. for removal. There is a srew located close to filter assy. in back use nut driver 1/4"located to remove this screw, there are then 2 screws located to the rear and side of light holders, both phillips head, the one on the left side is a bit tricky to remove but I use a thin bladed scredriver, Next there are 2 screws located on both ends od the slides that control temp, both again removed witn1/4 " nut driver, the whole upper assy drops down and forward the Adeptive Defrost assy is located in the back right corner of this assy, unplug the wires and unit snaps out, I foud it easier to pop off top cover of new unit so I could see connector assy when I reattached the wires, then replaced the top assy and snapped new unit it place, Reassymbly was reverse of removal, before placing cover assy back in place I replaced both lamps as 1 was out .
        • Herman from Hughesville, PA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          61005988, WPA3073101
        27 of 33 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        burnt out bulb
        took cover off, installed bulb.
        lost the owners manual,
        part select's schematics were very helpful
        thanks
        • THOMAS from STOW, OH
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
        • Parts Used:
          WPA3073101
        25 of 57 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Ice maker not making ice, also needed drumwheel for the front of the ice bucket, wouldn't crush ice , and ice would get stuck
        Took the rear bottom panel loose , the ice maker and water dipenser valve is in the right corner. Turn off water line to the refrigerator , and also unplug the electric from the outlet. It is easier to take the ground wire loose from the valve bracket now , before taking valve out of the bracket. take the two water lines that run to the door and the ice maker loose, then remove the main inlet line. Once you have the water lines off, then you can remove both electrical plugs from the electric coils. The water lines that run to the door and the ice maker cant be confused , because they are two different sizes , so they will only fit the correct side. The electrical plugs are pretty simple as well as, the wires are the same color as the coils, so its fairly easy to see which one goes where. The replacement process is pretty self-explanitary , just reverse the order. Just as a hint of advice , have a sponge or mop ready to clean up the water that comes out of the lines when you remove them. I also changed the drum wheel in the front of the ice bin, this process is not easy if you let the blades and spacers fall apart , as they have to pretty much have to be in correct order , or your ice bin will not crush ice , and you could possibly bust the bin into pieces. The process is not really hard , just pay close attention to what is coming off from where!!! There are two bolt on the bottom of the front cover , take them loose and pull the cover forward from the bottom, then lift a little , should come off. Then the metal front cover should be exposed, ther are two bolts in it as well , remove them , and the front should be loose , this is when you hold the auger and keep an eye on the blades. There is also a nut , right in the center of the wheel you have to take loose , hold the auger then take the nut loose with a 1/2 in. wrench. Once you remove the nut the drum pulls right off the auger. When going back together , make sure the ice crusher blades all line up correctly , as the blades wont work at all . They have to slide back into the blade pivot bracket (slot made into the plastic bucket front). As I said before , be sure and pay close attention , and this process will go easily. The drum is marked front side , or this side out, be sure its installed correctly , as the ice will not feed right. The first cycle of the ice maker making ice will probably be only 1 or 2 cubes , but the second time around you will have a full set of 8 , the water lines get air in them while they are unhooked so you wont get a full cycle the first time.
        6 of 7 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        light blew out
        change light bulbs
        • KELVIN from SOUTHFIELD, MI
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
        • Parts Used:
          WPA3073101
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Freezer cold, refrigerator not cooling
        First I removed the top shelf and its contents to allow for more room. Then I removed the plastic temperature control housing by tugging housing forward and releasing it from the two clips located at the upper rear corners of the fridge. Then pull down. Then I removed the three screws holding the entire temperature control assembly and dropped it down to access and remove defrost assy. Installed new defrost assy. and re-assemble in reverse. Change light bulbs before replacing final housing. Also, a good time to clean housing interior before re-installing.
        2 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Ice Maker stopped working-Fridge failed to defrost and stopped cooling in both compartments.
        I popped out the side panel to the right of the ice maker and removed the ice tray-then used a nutdrive to remove the screw under the ice maker. Lifted up on the unit , dropped it down and used a flat head screwdriver to press the tab in on the electrical connector at the rear-then removed the unit from the Freezer. The end cap that covers the controls on the old unit snapped off easily as did the small metal tab (both needed to be placed on the new one) and I re-installed the new ice maker doing the reverse of the removal. Watch to make sure that the white rubber water line goes back into place as you remount the ice maker in the Freezer.

        As for the thermostat, I loosened the temperature control cover in the top of the refrigerator by pulling down on it, needed to pull out a bit to clear the control levers-easier if they're centered on the 5. I removed the retaining screw in the center of the rear of the cover using a nutdriver, and that lowered the cover enough to remove the screws that held the thermostat assembly in the upper right (also using the same nutdriver that worked on everything else). I removed the electrical connector from the old thermostat and attached it to the new one. The old thermostat didn't have a cover on it like the new one, and it was easier to make sure that the electrical connector was attached by popping the cover apart-attaching the connector, and then snapping it back together. The new unit snapped into place by pressing down firmly, then I re-assembled the cover plate doing the reverse of the removal.

        If you don't count the two hours that I spent defrosting the freezer coils with a hair dryer-these were FAST repairs, and the refrigerator is running like new again
        • Bradley from Cosmopolis, WA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          61005988, D7824706Q, WPA3073101
        1 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Light over range burned out
        Philips screwdriver
        Removed screw (1)
        Removed light bulb
        Put in new light bulb
        Closed door to bulb compartment
        Returned screw.

        Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/delivery was fast. No need to have spare on hand.
        • Vincent from CHICAGO, IL
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WPA3073101
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11747806
              Manufacturer Part Number: WPA3073101
              Brand
              Model Number
              Description
              Kenmore
              10641522500
              Refrigerator
              Kenmore
              10641523500
              Refrigerator
              Kenmore
              10641524500
              Refrigerator
              Kenmore
              10641529500
              Refrigerator
              Kenmore
              10644022600
              Refrigerator
              Kenmore
              10644022601
              Refrigerator
              Kenmore
              10644022602
              Refrigerator
              Kenmore
              10644022603
              Refrigerator
              Kenmore
              10644023600
              Refrigerator
              Kenmore
              10644023601
              Refrigerator
              Kenmore
              10644023602
              Refrigerator
              Kenmore
              10644023603
              Refrigerator
              Kenmore
              10644024600
              Refrigerator
              Kenmore
              10644029600
              Refrigerator
              Kenmore
              10644029601
              Refrigerator
              Kenmore
              10644029602
              Refrigerator
              Kenmore
              10644029603
              Refrigerator
              Kenmore
              10644032600
              Refrigerator
              Kenmore
              10644032601
              Refrigerator
              Kenmore
              10644032602
              Refrigerator
              Kenmore
              10644032603
              Refrigerator
              Kenmore
              10644033600
              Refrigerator
              Kenmore
              10644033601
              Refrigerator
              Kenmore
              10644033602
              Refrigerator
              Kenmore
              10644033603
              Refrigerator
              Kenmore
              10644034600
              Refrigerator
              Kenmore
              10644039600
              Refrigerator
              Kenmore
              10644039601
              Refrigerator
              Kenmore
              10644039602
              Refrigerator
              Kenmore
              10644039603
              Refrigerator

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service