Wrench Parts

Your Price

$5.95

PartSelect Number PS11927770

Manufacturer Part Number 608114-00

Secure your sockets with this genuine OEM Hog Ring for DeWalt Impact Wrenches. Made of durable metal and sourced directly from the original manufacturer, this high-quality part fits onto the end of the anvil to help retain sockets during use. Over time, hog rings can wear out, become damaged, or go missing—affecting tool performance and socket stability. Replacing the hog ring is a simple repair that requires only a screwdriver. Carefully remove the existing ring from the anvil, then position the new one in place and secure it using the appropriate fastening method. This part is sold individually, so be sure to order the correct quantity for your tool.

Your Price

$8.95

Wrench Clip

PartSelect Number PS11882810

Manufacturer Part Number 322045-1

This replacement clip is an authentic OEM component which is made for Makita impact wrenches. The part is secured in the anvil and it helps to apply tension on the socket to secure it. Over time it may wear out and lose tension eventually requiring a replacement. If a socket does not stay put on the anvil, a faulty or a damaged clip may be the cause. Make sure to refer to the appropriate diagrams of your model for the exact location and the correct installation of this clip. One durable metal item is included. You will need pliers to remove the old one and secure the new one in the anvil.

Your Price

$18.45

Wrench Carbon Brush With Holder

PartSelect Number PS10181326

Manufacturer Part Number 610126-00

Genuine OEM Dewalt replacement Carbon Brush and Holder Assembly. This brush comes complete with carbon brush, spring, and holder. Most brush replacement jobs will require the purchase of two of these brush assemblies. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Your Price

$6.95

Wrench Pin

PartSelect Number PS11882848

Manufacturer Part Number 323675-1

This authentic Makita replacement part is designed for use with impact wrenches. This pin fits in the anvil and it helps to hold sockets in place. This part is made out of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers.

Your Price

$40.95

Wrench Switch Complete

PartSelect Number PS16286110

Manufacturer Part Number 143975-1

Your Price

$5.95

Wrench Ring Spring

PartSelect Number PS11924891

Manufacturer Part Number 086947-00

Maintain the performance of your impact wrench with this genuine OEM ring spring. Designed for use with select DeWALT, Black & Decker, and Porter Cable models, this durable metal component fits securely on the anvil to help retain sockets during operation. Over time, the ring spring can wear out, become damaged, or go missing—leading to reduced tool efficiency or socket retention issues. Replacing it is a simple fix that restores proper function. Be sure to consult your tool’s diagram to confirm the correct placement. This part is sold individually.

Your Price

$5.95

Wrench Steel Ball 4.8

PartSelect Number PS10142081

Manufacturer Part Number 216002-8

This genuine OEM steel ball is found within the housing of your power tool. It serves as a detent mechanism, securing the shift knob in various positions to allow for the selection of different operating modes. It has a diameter of 4.8mm. If you notice signs of wear or deformation on the steel ball, it is a clear indication that it needs to be replaced. A worn-out steel ball can result in a loose shift knob that fails to hold its selected position properly. To locate and access the steel ball within the housing, refer to the instructions outlined in your user manual. Your tool may use steel balls of different sizes, so confirm that this is the correct part your repair will need before making your purchase.

Your Price

$5.95

Wrench Flat Washer 16

PartSelect Number PS10144332

Manufacturer Part Number 253707-9

This authentic flat washer is a high quality item that is sourced from original equipment manufacturer for use with Makita power tools. Its purpose is to distribute the pressure evenly between the two connected parts. It has multiple applications depending on your unit, please make sure to check appropriate diagrams for correct location and use of this item. One durable metal flat washer is included per order.

Your Price

$5.95

Wrench F/r Change Lever

PartSelect Number PS11884000

Manufacturer Part Number 455053-8

This f/r change lever is supplied directly from the original equipment manufacturer. Compatible with the Makita XST01 18V LXT Cordless 3-Speed Impact Driver, this item is sold individually. The plastic lever is fitted in the housing set, above the switch, allowing the operator to change the direction of the drill bit. A screwdriver is necessary for the removal and replacement.

Your Price

$5.95

Wrench O Ring

PartSelect Number PS16676215

Manufacturer Part Number 050056-00

Maintain a secure seal and reliable performance in your power tool with this durable O-ring. Sourced from the original equipment manufacturer, this flexible rubber component is designed to create an airtight seal between connected parts. Over time, O-rings can deteriorate, crack, or lose elasticity—leading to air leaks and reduced tool efficiency. Sold individually, this replacement part offers a simple and effective solution to restore proper function and prevent performance issues.

Top Brands

Top Product Types

Popular Wrench Parts

Wrench Brands

Popular Wrench Models

Wrench Parts

Find Your Part

Popular Wrench Parts

Wrench Brands

Popular Wrench Models