Whirlpool Dryer Switches

Popular Whirlpool Dryer Switches

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
What this part fixes:
  • Door won’t close
  • Drum Not Spinning
  • Light not working
This dryer start switch is a key component that completes the electrical circuit to initiate the drying cycle. Once a timer setting is selected, pressing and releasing the switch activates the dryer. Installation requires a 1/4-inch nut driver and a flathead screwdriver. To replace, first unplug the appliance, remove the rear panel and the old switch, then install the new switch and reattach the panel. For detailed guidance, refer to the manufacturer’s installation manual.
This dryer start switch is a key component that completes the electrical circuit to initiate the drying cycle. Once a timer setting is selected, pressing and releasing the switch activates the dryer. Installation requires a 1/4-inch nut driver and a flathead screwdriver. To replace, first unplug the appliance, remove the rear panel and the old switch, then install the new switch and reattach the panel. For detailed guidance, refer to the manufacturer’s installation manual.
What this part fixes:
  • Won’t Start
This part is used to start the dryer once you have selected a setting on the timer. The terminal locations on the new switch may be different, match up terminal numbers from old switch to new.
This part is used to start the dryer once you have selected a setting on the timer. The terminal locations on the new switch may be different, match up terminal numbers from old switch to new.
What this part fixes:
  • Will Not Start
  • Won’t Start
This is a genuine OEM part. The push-to-start switch is composed of metal and plastic components. Compatible with dryers, the Whirlpool switch powers the appliance after the button is pressed. With a screwdriver, this item is fitted between the bracket and console. The push-to-start switch is sold individually.
This is a genuine OEM part. The push-to-start switch is composed of metal and plastic components. Compatible with dryers, the Whirlpool switch powers the appliance after the button is pressed. With a screwdriver, this item is fitted between the bracket and console. The push-to-start switch is sold individually.
What this part fixes:
  • Touchpad does not respond
  • Won’t Start
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
What this part fixes:
  • Running With Door Open
  • Won’t Start
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
What this part fixes:
  • Will not agitate
  • Will not drain
  • Will Not Start
What this part fixes:
  • Running With Door Open
  • Won’t Start
This part replaces older two terminal switches.
This part replaces older two terminal switches.
What this part fixes:
  • Noisy
  • Running With Door Open
  • Won’t Start
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
What this part fixes:
  • Won’t Start
The push-to-start switch activates the dryer when pressed and released. Compatible with select dryer models, this part ensures proper functionality. Verify fitment before ordering, as similar parts may have slight variations. Disconnect power before installation and use protective gloves.
The push-to-start switch activates the dryer when pressed and released. Compatible with select dryer models, this part ensures proper functionality. Verify fitment before ordering, as similar parts may have slight variations. Disconnect power before installation and use protective gloves.
What this part fixes:
  • Won’t Start