Samsung Cooktop Parts

Weak flames or a burner that will not light can point to a cracked, warped, or blocked burner base. This metal support helps hold the small surface burner assembly in place and directs gas toward the head for steady cooking. First clean the removable pieces and confirm that the burner cap is level. Also check the igniter and nearby connections before ordering a replacement. Verify fit using the full appliance model and burner location because similar bases may differ. Turn off the gas valve, unplug the range, and wait for every surface to cool. Avoid bending the igniter or changing the gas orifice. After installation, confirm an even flame and discontinue use if gas odor is present.

The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.

*Sold Individually: Pack of 1*

If a surface burner clicks but lights poorly or burns more strongly on one side, inspect the cap before replacing other components. A chipped, misplaced, or grease-covered cap can disturb the flame pattern. Lift it off only after the burner is off and cool, then clean and dry both mating surfaces. Also check the burner ports for debris without enlarging the openings. If replacement is needed, use the complete range model and burner position to confirm fit. Set the cap level on its matching head before replacing the grate. Test the burner briefly, and turn it off at once if flames remain uneven or you smell gas.

The surface element supplies the heat to a cooking area on top of the range.

This surface burner cap (part number DG62-00137A) is for ranges. Surface burner cap DG62-00137A fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating. Wait until the surface is cool to the touch before installing this part.