My Orders
Roper Refrigerator Ice Makers
GET YOUR OFFICIAL Roper PARTS TO ENSURE VICTORY
Popular Roper Refrigerator Ice Makers
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.
What this part fixes:
- Ice maker dispenses too little ice
- Ice maker dispenses too much ice
- Ice maker not making ice
Designed for Whirlpool and compatible refrigerators, this ice bucket stores ice from the icemaker and fits easily into the freezer compartment. It’s made from sturdy plastic and sold as the container only—other parts like the auger are not included. A simple, tool-free replacement for restoring ice storage.
Designed for Whirlpool and compatible refrigerators, this ice bucket stores ice from the icemaker and fits easily into the freezer compartment. It’s made from sturdy plastic and sold as the container only—other parts like the auger are not included. A simple, tool-free replacement for restoring ice storage.
This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker. This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes eight radius ice cubes.If your ice maker is no longer making ice, dispensing ice, or if it is leaking, it will need to be replaced.
This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker. This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes eight radius ice cubes.If your ice maker is no longer making ice, dispensing ice, or if it is leaking, it will need to be replaced.
This ice guide is located in the freezer door.Turn off the ice dispenser before replacing this part.
This ice guide is located in the freezer door.Turn off the ice dispenser before replacing this part.
What this part fixes:
- Door Sweating
- Ice maker dispenses too little ice
- Ice maker dispenses too much ice
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering.
Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering.
Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.
This ice bin collects the ice cubes dropped from the icemaker. The auger is NOT included with this bin.
This ice bin collects the ice cubes dropped from the icemaker. The auger is NOT included with this bin.
This white ice bin auger drum comes with a washer.
This white ice bin auger drum comes with a washer.
What this part fixes:
- Ice maker dispenses too little ice
- Ice maker not making ice
- Ice maker won’t dispense ice
This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.
This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.
This icemaker kit comes with a flat plug, wiring harness, fill tube, water inlet valve, ice bin, mounting hardware, and instructions.
This icemaker kit comes with a flat plug, wiring harness, fill tube, water inlet valve, ice bin, mounting hardware, and instructions.