Planer Jointer Parts

Length 8 Foot Length: 6' Gauge: 18 Wires: 2 Type: Bare Wire This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sold separately. Replacing this power supply cord you will need a screwdriver. • Remove the housing screws • Remove the the housing • Disconnect the old cord wires • Remove the old power cord • Secure the new cord in place • Connect the wires • Reassemble and test the new cord

This is a genuine DeWalt replacement drive sprocket, designed to work seamlessly with the drive chain to power the feed rollers in select DeWalt planers. Built for durability and precision, this part plays a key role in maintaining smooth and consistent material feed during operation. It is sold individually and is compatible with several DeWalt planer models. For example, the DW734 requires one sprocket, while the DW735 and DW735X models each use four. Be sure to check your model’s specifications to determine the correct quantity needed. Replacing a worn or damaged sprocket can help restore optimal performance and extend the life of your planer.

This genuine DeWalt replacement drive belt is designed specifically for the DeWalt planers listed below, ensuring a perfect fit and reliable performance. Installed between two pulleys (part numbers 5140010-22 and 5140011-88), the belt plays a crucial role in transferring power to the planer’s cutting mechanism. Over time, belts can stretch, crack, or wear out, which may affect your tool’s efficiency and precision. To keep your planer running smoothly, it’s a good idea to have a spare belt on hand. This OEM part is sold individually and offers the same quality and durability as the original. If you're replacing a worn or damaged belt, be sure to follow your tool’s manual for proper installation and tensioning.

Genuine Manufacturer Approved replacement part designed for certain DeWALT Planers. This part is made out of Plastic and it is Sold Individually. This Adapter allows you to connect Dust Chute to your unit.

This genuine OEM circuit breaker is specifically designed for planers, ensuring reliable protection and compatibility. Built to handle up to 18 amps, it helps safeguard your tool from overloads. If your planer stops operating due to an overload, simply turn off the unit and press the reset button to restore function. However, if the motor fails to start, a faulty circuit breaker may be the cause and should be replaced. This part is sold individually and is not an aftermarket substitute—it's the exact replacement used in original DeWalt equipment. Installation is quick and straightforward, requiring only a screwdriver. Always consult your tool’s manual for proper installation and safety instructions.

Genuine Makita replacement part, this item is sold individually. The Pin Cap is part of the spindle lock assembly for the Makita Tool model numbers shown below. When it is pressed it will stop the spindle from rotating, so that a grinding wheel or blade can be removed or installed.

This is a genuine part sourced directly from the manufacturer. The cup washer is commonly found in Makita power tools. The washer is utilized to provide a tight fit between connected parts. It is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. Refer to the diagrams for your model to ensure the exact location and the correct application of this part. Keep in mind this cup washer is made of durable metal and is sold as an individual item.

This is a Push-Button type switch that has 4 terminals, 2 internal and 2 external. This genuine Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: • The tool has completely stopped functioning - it will not start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.

This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool will help will cord life. This cord guard is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.

This switch knob controls the on/off function of the tool, allowing you to start, stop, and lock the tool in operation for continuous use. Made from durable plastic, it is designed to withstand regular wear while maintaining smooth, reliable engagement with the internal switch mechanism. Replacing a worn, cracked, or sticking knob helps restore proper control and ensures consistent, safe operation of your power tool.