OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
About this fix
Common problems and models this part fixes.
Really Easy
15 - 30 mins
Rated by verified customers
What this part fixes:
Will Not Start
Freezer section too warm
Fridge too warm
Fridge and Freezer are too warm
Clicking sound
Too warm
Works with the following products:
Refrigerator
Part# 8201786 replaces these:
AP3885081, 1177466, 2188829, 2188830, 2188832, 2188833, 2188844, 2188845, 2188846, 2188847, 2212193, 2212194, 2216697, 2216722, 2220474, 2220475, 2220476, 2220477, 8201531, 8201532
...
Show more, 8201786, 8201786VP Show less
Customer Reviews
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
9 Reviews
4.7
Out of 5
5 Stars
7
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Shawn W - August 5, 2018
Verified Purchase
Easy to install fixed refrigerator
Shipping was fast saved a costly new fridge bill.
★★★★★
★★★★★
James S - July 31, 2018
Verified Purchase
Easy to replace.
The part arrived in 2 days. Easy install, but the part didn't fix my problem. It turns out it was the compressor that was my problem.
★★★★★
★★★★★
Wayne B - June 4, 2020
Verified Purchase
part was what i needed works well THANKS
easy to install saved a few bucks by doing myself was delivered fast and in good shape. Thanks for your prompt service Wayne
★★★★★
★★★★★
Massoud S - September 14, 2018
Verified Purchase
Fridge and freezer was not cooling
Excellent customer service. I received the parts as it was promised in good condition. The video was perfect to help me to repair my fridge. Repair was easy and my fridge is back on working perfect.
★★★★★
★★★★★
Johannes H - February 19, 2020
Verified Purchase
Exactly what was required
This appears to be fix the most common breakdown on older Whirlpool/KitchenAid fridges. A burned out compressor start relay switch. You can tell if that's the problem if the cooling fan works fine and the compressor tries to switch on but immediately makes a loud click and turns off. Old relay also rattles when you disconnect and remove it. Replacement kit designed for multiple models but relatively easy to install. Instructions ok. I found it was easier to reconnect the wires first before installing the new relay.
★★★★★
★★★★★
Ali S - July 31, 2019
Verified Purchase
Works perfect!
Great quality
★★★★★
★★★★★
Jeannine L - April 29, 2019
Verified Purchase
Easy repair
Bon service , réparation complétée avec succès...facilement merci
★★★★★
★★★★★
Kristen G - February 2, 2019
Verified Purchase
Part worked - but the cover that came with it wouldn’t fit.
The part came quickly. It was easy to install and got our fridge running again. The package came with a cover that was supposed to go over the switch but I could not get it to fit.
★★★★★
★★★★★
Stephen G - July 23, 2021
Verified Purchase
Not the right part
The part came on time but did not fix my problem changed three parts and still have a fridge that does not work
Prev
1
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Really Easy
15 - 30 mins
Average repair rating from 27 real customers like you
Sort by:
Prev
1
2
3
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Both freezer and refrigerator stopped cooling
224 of 281 peoplefound this instruction helpful.
Laune from Front Worth, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
Compressor Start Divice kit, I took off back lower panel with the 1/4 inch nut driver, on the compressor their was a wire hook that held the starter in place used my plyers to unhook, pulled the unit off plug the new unit in reappled the clip it was so easy I had to exame it severl to time to make sure that was all their was to it. put th
... Read moree cover back on and turn the refrigerator on and it has work great, I did not install the Bi-Metal Defrost Thermostat it was not needed.
Clicking from underneath the fridge, and compressor engaging only intermittently
198 of 239 peoplefound this instruction helpful.
Michael from Manvel, TX
Really Easy
Less than 15 mins
Nutdriver
I diagnosed the problem as a bad relay. I detached the two sets of wires leading to the relay and compressor, then pulled the relay off the compressor. It rattled and small bits of detritus fell out from inside of the relay. The new relay came the next day. It did not rattle. It was identical and I simply did the reverse to reinstall.
Was this helpful?
Thank you for voting!
No Cooling
53 of 57 peoplefound this instruction helpful.
Gregory from Portland, OR
Really Easy
Less than 15 mins
I noticed the fan was running but not the compressor, they are wired in series meaning the compressor should also have power and you should hear the compressor. Could not hear compressor coming on, removed the white relay attached to the side of the compressor and could hear loose pieces shaking in relay. Ordered new relay and plugged it
... Read morein, took less than five minutes. Very Easy. Thank you Partsselect
Read less
Was this helpful?
Thank you for voting!
woke up to very harshburnt wire smell cominf from the back of the refrigerator
37 of 45 peoplefound this instruction helpful.
Don from New Port Richey, FL
Easy
Less than 15 mins
I found many helpful tips and pdf instructions online, removed the back of the refrigerator can remove the compressor relay. I ordered a new compressor relay or start relay kit, followed the instructions and put the new compressor relay in. Refrigerator is working great...
Was this helpful?
Thank you for voting!
fridge stoped cooling
31 of 35 peoplefound this instruction helpful.
ADIS from JACKSONVILLE, FL
Really Easy
15 - 30 mins
Screw drivers
Please read stories that apply to you on this web page, cause it can help you save big bucks. My fridge is about 2 yrs old and one morning it simply stopped cooling. I heard the clicking noise coming from the back bottom of the fridge as if condenser wanted to start up. Pulled the fridge out took the back cover off and heard that sa
... Read moreme noise coming from the little black box ( start-device) attached to condenser. Went on this same web page and found exact same device for $49 whereas if I did not know much about electronic repairs, traditionally the repair guy would have had charge me at least couple hundreds. So do it here first, it wont cost you much. Replacing this part is so simple, pull the device out away from condenser by hand as if you were unplugging an extension cord and plug the new start-dev in. SIMPLE. Make sure to take pic with ur phone to wire it back properly. (ONLY 2 WIRES)
Read less
Was this helpful?
Thank you for voting!
was not cooling
30 of 34 peoplefound this instruction helpful.
steve from melbourne, FL
Really Easy
Less than 15 mins
Screw drivers
I unscrewed the bottom of the back panel and heard a clicking noise from the compressor starter. it was held in by a clip, flipped it to the side pulled the starter off and disconnected the wire harness. pushed the new one in reconnected it . And it worked. I have very little experience and it was very easy.
Was this helpful?
Thank you for voting!
Smelled Electrical Burning / Smoke
26 of 42 peoplefound this instruction helpful.
Stephen from Holt, MI
A Bit Difficult
15 - 30 mins
Nutdriver
Removed cardboard back from refrig. Found source of smell/burn. Removed part. Ordered several replacement parts as the diagram was not clear as to which part would be needed. New parts arrived, matched with old. Cleaned carbon from contacts, installed new part. Cleaned dust from refrigeration coils, installed back. Returned unused p
... Read morearts.
I removed the back panel off the fridge and removed the old start relay device by simply unplugging it from the compressor. I had to detatch two wires and a capacitor from the device. The old start relay was definitely bad and you could tell by shaking it. Plugged in the new start relay device, reattached the wires and capacitor and wa
... Read mores done. Fridge is perfect now! Very simple!
Read less
Was this helpful?
Thank you for voting!
No-Refrigeration
18 of 32 peoplefound this instruction helpful.
Joseph from Red Bank, NJ
Easy
30 - 60 mins
Screw drivers
Read the instructions that came with the relay/overload.
Determined wich of the relays and overloads in the kit supplied was needed on the refrigerator.
I removed the cover for the lower part of the refrigerator to inspect the wiring and motor. I removed the switch and removed the wiring from it. The wiring just plugs in. When the new switch arrived, I just reinstalled it to the side of the motor and the refrigerator has been working fine ever since.
Was this helpful?
Thank you for voting!
Prev
1
2
3
Next
DIY Questions and Expert Answers
13 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald Dykes - For model number edogtqxkqoo
August 13, 2017
Compressor comes on runs about 30 sec. Then cuts off hope its the relay
Hello Donald, you can test the relay and the capacitor with a multimeter to determine which is at fault. Hope this helps!
4 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Silvana
April 6, 2018
Please confirm for what capacity is this piece with part number 2188830 , is it for 1/3, ¼ or ½?
Hi Silvana,
Thank you for your question. This capacity for this compressor start device can be used for both 1/3 and 1/4 Hp compressors. I hope this helps. Thank you and have a great day!
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Steve
April 16, 2018
Refrigerator is cold but evaporator fan runs constantly. Condenser coil is clean. Any help would be appreciated.
Hi Steve,
Thank you for your question. The evaporator fan is used to draw air over the evaporator coil and circulate the cold air throughout the fresh food and freezer compartments. If the evaporator fan does not work then the control thermostat or sensor may not correctly sense the temperature and the compressor will continue to run longer than normal. The fresh food and freezer compartment temperatures will increase as well. The evaporator motor and fan are located in the freezer compartment and you can normally here the motor or feel the air movement when running. If you suspect that the fan motor is not running properly, then turn off the refrigerator and remove the evaporator fan cover. Verify that the fan blade is secure and that the motor is not seized. You can check the motor for continuity with a multi-meter. You can also verify that power is applied to the motor when the compressor is running. This is a live voltage check and should only be performed by a qualified person. I hope this helps. Thank you and have a great day!
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Anthony - For model number IS25AGXRQ00
August 29, 2017
Compressor not coming on at all. Should i be able to measure voltage on the power connector that plugs into the compressor start module? 2 wires, red and white, i get no voltage there? Everything else seem to have power, inside light, lights on front freezer door will come on when switched to on. I have continuity on the module when testing with meter, just seems no power is getting to it.
Hello Anthony, thank you for contacting us. This sounds like its going to be either the start device or the capacitor on the compressor. It needs these parts to help boost the power to start up. The start device and the capacitor can be tested with a multi-meter to determine which is at fault. Hope this helps!
After hurricane irma, plugged refrig back in after power restored. No cooling. Everything is working, lights, fan, etc. Compressor is hot but not running. How does one check the starting capacitor and the starting kit device. Or is the starting device working since the compressor is getting voltage as it is hot to touch?
Hi Murray,
Thank you for your inquiry. To verify which part is causing the issue you will need to use a multimeter to check the continuity of each part. I hope this helps. Thank you and have a great day!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Gary - For model number 106.41212100
March 5, 2018
Does not start but when i unplug for awhile retry it starts but have to keep temp control cranked
Hello Gary, thank you for your question. The first parts you will want to check in regards to this issue are the Compressor Start Device Kit Part Number: 8201786, Capacitor Part Number: WPW10662129 and the Thermostat Assembly Part Number: WP2198202. I hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Michael - For model number ksru22fkwh01
May 21, 2019
My start relay burned out. I have compressor egy80 style 2. Instructions say to use part 2187145. I am not sure which part that is. There are two parts one with a red dot and one with a black dot,
Hello Michael, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS371273. Hope this helps!
Was this helpful?
Thank you for voting!
Mike - For model number ed5ghexnt00
December 10, 2019
My fridge cools but then it stops and warms up like the defrost thermostat or control board but i replaced them . It comes on when i hit the side of the fridge and blows cool air and did that before i replaced the parts above. As of last night it came on only for a minute then shut down and would not come on when i hit the side. As of this morning it was about 45 degrees. Can you advise what part you think it might be?Thanks
mike smith
Hello Mike and thanks for writing.
It certainly sounds like a faulty Compressor starter PS993073 test and replace if needed. We hope this helps. Please contact us anytime. Also, check the wiring for any possible loose connections.
Was this helpful?
Thank you for voting!
James - For model number ED5FHGXKT00
February 13, 2020
My compressor will not turn on?
Hello James, Thank you for the question. In most cases if the Compressor will not start, the Compressor Start Device Kit, PartSelect Number PS993073 will need to be replaced. We hope this helps.
Was this helpful?
Thank you for voting!
James - For model number KSRB22FKSS03
March 26, 2020
KitchenAid model ksrb22fkss03, no cooling, both fans run, compressor will not start. Is their a way to test start relay?
Hello James,
Thank you for your question. Yes, you can use a tool called a multimeter to test the voltage on the start relay to see if it is defective. We hope this helps.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
My Orders
