Product Description
Hinge Bearing Specifications
Sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Hinge Bearing
Troubleshooting
This part fixes the following symptoms:
Clicking sound | Door won’t open or close | Noisy | Door Sweating
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Westinghouse.
Part# 240328203 replaces these:
AP3757897, 1056737, 7240328203
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Hyundon L - September 19, 2021
Verified Purchase
Very Good —-
Delivery was not fast than expected. But after chage the hinge, my fridge works very good. Thanks a lot.
Chris B - September 15, 2021
Verified Purchase
Great replacement
If you are doing the fridge and freezer and there is a water/ice dispenser. Make sure you get the two different parts. One for the fridge and one for the freezer.
DONATO T - May 30, 2021
Verified Purchase
# 1
the part was exactly what was needed and worked perfectly! Also thank you for the helpful video.
John T - March 18, 2021
Verified Purchase
Works perfectly. Took longer to arrive than expected.
Works perfectly. Took longer to arrive than expected. It was easy to install watching YouTube videos, however, the broken piece needed to have a hole drilled in it and a long wood screw inserted in order to pull it out of the fridge door with a pair of pliers. Replacement part fits perfectly with existing bottom bearing and very smooth once cleaned.
Barbara J - July 9, 2020
Verified Purchase
Simple!!
The delivery of the part took a bit longer than hoped for but now that the repair is done, fridge is back to normal.
Ian C - November 15, 2019
Verified Purchase
It was the right part
It was the right part and the delivery was fast.
Carrie C - June 10, 2019
Verified Purchase
Easy, economical repair!
The part arrived quick, the repair was simple, and the best part is there's no more loud noise when I open the fridge door! I'm very happy I bought this part.
Gregory D - March 5, 2019
Verified Purchase
Worked as described
Went online, put my model# in, parts list came up. Ordered, came in, installed. Just like partsselect.ca said! NO HASSLES!!! Second time using, and will use again in the future.
Gerry H - January 22, 2019
Verified Purchase
Perfect part for the perfect fix
Great quick shipping and the parts fit beautifully. My fridge door doesn’t drive me nuts clucking any longer. Thanks Parts Select !!
Ian J - December 11, 2018
Verified Purchase
Relief from clicking and unwanted opening
This part had previously broken apart leaving a little shard at the bottom of the door. We ignored it for a while having just removed the bigger broken piece and left in the shard. The result was an awful clicking noise every time the door opened as well as the door not properly closing all the way. The door would often open up a little resulting in it eventually beeping at us to close it. So, we ordered this part to fix it. It took all of 10 minutes to take off the door, remove the shard with needle nose pliers, put the new piece back in, and reattach the door. Works perfectly now, no clicking and the door always closes itself and stays shut when given a little push.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 30 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door was making a popping sound when opened and closed
Unscrewd the top hinge cove and removed two bolts from the hinge, lifted door off of the bottom hinge and laid the whole door on the floor using a beach towel to protect it from scratches. Unbolted the bottom hinge plate, replaced it with the new one. Then pulled out the old hinge bearing and replaced with a new one. Installed the door back on the bottom hinge while the magnet on the door strip held it place and rebolted the the upper hinge and reinstalled the hinge cover. All done in less than 10 minutes. No more popping sounds when I open and close the door!
Other Parts Used:
-
Charles from Cypress, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
220 of 225 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the door would not close on it's own
The parts came within 2 days. The delivery was great. I took the food off the door, then removed the top hinge. Lifted door off bottom hinge and laid the door on a blanket on the floor. I then had access to the closing mechanism top and bottom that is just two plastic cams that lift the door as it opens. The weight of the door then is used on the cams to help close the door with the appliance level. It was very simple and assembly was just reverse order.
Other Parts Used:
-
harry from bradenton, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
33 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door had a poping sound when opening and closing
Removed the trim screw on top of the door then removed the two hinge bracket bolts. lifted the door
off placed on the table. Remove the two screws on
holding the bearing bracket on the bottom of the door.
removed the bearing and replace with the new one.
Reinstalled in reverse order.
off placed on the table. Remove the two screws on
holding the bearing bracket on the bottom of the door.
removed the bearing and replace with the new one.
Reinstalled in reverse order.
Other Parts Used:
-
Ivan from Mountain Home, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
17 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge bearing broke causing door to rub when opened
I removed the screw in the plastic cover on the top of the fridge that covered the fridge side hinge first. Then, I removed the two nuts with a nut driver that hold the hinge in place. After removing the two nuts and the hinge, I lifted the door up and out of the bottom hinge and placed it on a flat surface. I used a pair of pliers next to pull out the broken hinge bearing from the bottom of the door itself. After removing the old bearing I inserted the new bearing in the door. Next, I put the door back on making sure the hinge went into the hinge bearing and put the door in the closed position. After that was all done and the door was set properly, I put the top hinge back on with the two screws and put the plastic cover back in place. Took 20min to complete. A second set of hands would have been helpful with putting the door back on, but it can be done by yourself.
Other Parts Used:
-
Corey from Brazil, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
16 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door had a loud popping noise everytime you opened it.
The biggest part of the repair was getting everything out of the shelves in the door. I had to remove one phillips head screw from the plastic hinge cover on the top of the appliance. As per the owners manual I traced around the hinge with a pencil so I would be able to align the door to the same postion. Removed two screws with a nut driver and removed the top hinge. The magnetic strip held the door in place until I grabbed it and pulled it open then lifted it up off of the bottom hinge. I layed the door on the island counter and pried the bearing hinge out of the door stop and replaced it with the new one. I probably could have stopped there but figured the plate might have been worn so I remove one phillips head screw from the bottom hinge, lifted the plate off, and replaced it with the new one. I assembled everything in reverse order and voila, no more popping noises.
Other Parts Used:
-
Samuel from Alexander, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
14 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud snaping noise when refrig door was opened past 90 degrees and closed again
First I removed one screw holding top hinge trim in place. I than removed two screws holding top hinge from refrig. I removed refrig door and laid it on a table. I than removed two screws holding the door stop and bearing hinge. I replaced the defective parts and reassembled in reverse order. Simple 10 minute repair.
Other Parts Used:
-
Elgard from Rhinelander, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
12 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud crack when fridge door opened past 90 degrees
Unscrewed screw holding plastic clip on right hand top hinge. Unfasten two lags screws holding right hand top hinge. Lift door off bottom hinge. (Do not unfastened bottom hinge) Remove old plastic bearing and replace with new. Repeat aforementioned instructions in reverse order. DOG EASY.
Other Parts Used:
-
Barry from Spring valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Hinge Bearing
Removed the Plastic Cover at the top of the door. (One Phillips Screw ) Removed the Hex Screws with socket set. Lifted EMPTIED door off bottom hinge. Pulled the broken bearing out with needle nose pliers. (Very Easy!!!) Placed new bearing into slot and reversed the procedure. 15 minutes tops. I spent more time cleaning the door and gaskets than replacing the parts. Funny thing, I called the local appliance parts store and they stated this is a common problem. However, for such a common problem, they didn't carry the part and it would have cost more than what I paid here. Additionally, I paid for 3-5 day delivery. Part was here in 2 days. Awesome!!!! I'll always come here first for all my parts needs. A+++
Other Parts Used:
-
Edward from Newnan, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge clicked when opening and closing the door
Removed the fridge door, replaced plastic Hinge Bearing, re-attached door. WhaLa - No more clicking!
Other Parts Used:
-
Todd from Crown Point, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door 'clunked' badly when opening
The door clunk problem was as others described. Repair similar to others described. The major thing to understand which I didn't see listed elsewhere is whether the top or bottom little nylon toothed cam is broken. This part is the one in the door. There was also one in the hinge, PS976594 or PS430814 ? I ordered this one and was lucky that it was correct. I'm not sure whether it's possible to know whether door side or hinge side is broken, without removing the door to see.
Other Parts Used:
-
Eric from San Mateo, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
August 26, 2017
I replaced hinge bearing ps976452 on Frigidaire because of popping noise when opening and closing the door. Now it no longer pops when closing but still pops when opening. Any ideas?
For model number FRS26R2AWB
Hello James, thank you for contacting us. There is a door closer cam located on the bottom of the fresh food door. One is secured to the bottom of the door with a screw and one is secured to the hinge. One of the two door cams is either broken or it has a loose or missing screw. Hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
October 9, 2017
Does the hinge bearing come as a two piece set ? Or do you order top, and bottom ?
For model number PLHS237ZAB2
Hi Thomas,
Thank you for your question. Your bearing comes in different pieces. The bearings are different for each door as well. So you would have to look at your each door diagram and the cabinet diagram to get all of the bearings that you would need. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Rosemary
February 3, 2020
We installed the one door hinge because of the popping when opening and shutting the door still pops even louder!!! my husband said another hinge flew out of one side
For model number FRS6L7EESN
Hi Rose. We do not have much experience with this specific symptom. We recommend contacting the manufacturer directly for assistance. Thank you for your question and good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Dale
February 12, 2018
Is there a way to adjust the doors ?
For model number FRS6R5ESB0
Hi Dale, Thank you for contacting PartSelect. Very sorry but the doors are not adjustable. Thanks for the question!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
February 2, 2018
Looking for refrigerator door cam this is the one that sets on the hinge at the bottom can not find part or part number anywhere tks
For model number FRS6L7EESN
Hello Frank , Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS976594. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jacob
February 8, 2022
I see there are two connected parts responsible for the refrigerator door to close smoothly, a hinge bearing and a door cam. Is there any way to guess which one needs replacing prior to removing the door? Or does one order and replace both?
For model number 2545629340P
Hello Jacob, Thank you for the question. Once one starts to wear it will put wear on the connecting part witch can effect the new part installed. We recommended replacing both at the same time. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
JIM
December 22, 2022
The refrigerator makes sounds like it has trouble starting, but will finely start
For model number 253543634op
Hello Jim, thank you for contacting us. The most probable cause of the issue is a faulty run capacitor, part number PS2333670, or a defective start relay, part number PS8689661. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS976452
Manufacturer Part Number: 240328203
Manufacturer Part Number: 240328203
Brand
Model Number
Description