This part is the replacement upper front felt seal for your dryer. It is made of felt and is approximately 17 inches long and 1 inch wide. The felt seal allows the drum to glide smoothly on the front panel. If your dryer is noisy, will not tumble, or leaves marks on your clothes after the drying cycle, you may need to replace the upper front felt seal. This part is sold individually, so if you do not have any high-temperature adhesive, you will need to order that as well. Be sure to clean all the residue from your previous felt seal before you install the new one. This ensures a secure fit. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dryer Upper Front Felt Seal
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 134440200 replaces these:
AP3777104, 1061871, 5304433902
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.4
Filter By Rating:
5 Stars
2
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andre S - December 22, 2020
Verified Purchase
Short and sweet
Everything was perfect ! Thanks !
★★★★★
★★★★★
Lars O - December 6, 2019
Verified Purchase
perfect
Couldn't be happier. With the help of your online videos I was able to identify the parts I needed, get them ordered. They arrived and fit exactly as expected
★★★★★
★★★★★
Sylvain S - December 30, 2020
Verified Purchase
Really easy repair although very expensive parts.
The parts were received in good condition on time well packed, no issue whatsoever. Your video is clear and the repair is easy. My only bad comment would be on the price. This is surprisingly a high price for a peace of felt and glue. Nevertheless, I am very happy with the end result. The noise disappeared for good.
★★★★★
★★★★★
Michael A - August 30, 2023
Verified Purchase
Perfect fit!
The belt went on the dryer. (Also bought that here) While replacing the belt I also changed this upper drum felt. It is a high wearing part in the dryer and is good to change from time to time. Our dryer is approx. 7 years old. So it was time. It was super simple. The glue was expensive but necessary. You cannot find glue like this for temperatures as high as a dryer. Delivery was fast.
★★★★★
★★★★★
Phil C - December 4, 2021
Verified Purchase
Right part, easy to install, slow shipping
It was the correct part and fit properly. The most difficult part of the job was removing the old sealant from the dryer. Shipping was by Canada Post which resulted in the part not arriving for a week. :(
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
cloths getting caught along drum glide and lint trap and black streaks/sometimes tearing
1) pulled Dryer out from wall and removed top panel
First I removed the top of dryer by prying upwards with a screw driver to pop the clips that hold it in place,the second thing I done was to remove to screws that held the front of dryer in place,these screws are located in side the cover half way down.once tha twas completed I remove the front and took it out side where I used a wire brush to remove the old felt at least what was left.onced cleaned I applied the new felt using the supplied high temp glue and then used clothes pins to clamp the felt in place and left sit over night .next morning I installed with ease and all was fixed. NO MORE NOISE:)
removed top plus control panel laid on back then removed bottom panel and door panel. This made access to drum simple put new glides on and seals back together and running less than an hour.PS dont let little clips fall down in motor area pain to get out,also great time to clean out unit
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
March 13, 2018
Cloths are getting pinched between drum and front panel on along top edge of drum....will replacing the felt pieces upper and lower on the drum fix this, if so does the glue that comes with the lower provide enough for both? or other parts. thanks
For model number GLER1042FS0
Hi Bruce,
Thank you for your question. The upper drum glide, part number PS470317, should fix this issue. The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease and little sound. The front upper felt glide pad with three nylon glides also includes adhesive, essential for mounting accurately. One tube of adhesive, should be enough, but if you need another, the part number for it is PS474458. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
June 3, 2022
I am buying the upper and lower felt. The lower felt comes with high temp adhesive tube. Is there enough adhesive left over to install the upper felt or do I need to buy another tube?
For model number GLEQ2152ES1
Hello John, Thank you for the question. One tube of adhesive should be enough, however if you need another, the part number for the Adhesive is PS474458. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I replaced the motor about 3 months ago from the front and thought i was done .But still not drying so checked my work and saw that the seal on the back was torn is this a problem if so how to fix it .I can't order a new one that i see online .So that do i do now.
For model number AGQ6000ES4
Hello Kevin, Thank you for your inquiry. If the seals/gaskets are leaking, that is one of the reasons it could be not drying. The other causes could be the gas coils, the blower, the sensors, the thermostats, and the limiter. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
Paulina
October 21, 2019
Hi there, i have a Kenmore dryer that looks like the felt has got snagged by something. Would this item work for my dryer? Or is there a better part? Thank you.
For model number 970-c82062-10
Hello Paulina, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS975866
Manufacturer Part Number: 134440200
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dryer-Seals-and-Gaskets.htm"},{"position":3,"name":"134440200","title":"134440200","url":""}]
