Product Description
Dual Surface Element Switch - 1000/2400W Specifications
Used with Halogen Burners.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
KitchenAid.
Part# 8203536 replaces these:
AP3751872, 1059867, 8203536, 9751758
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Fred Q - August 19, 2021
Verified Purchase
wrong part was delivered after the initial order, Right part was delivered the second time..
As the result of the wrong part delivered I had to paid the electrician twice to get one switch replaced. First time he came and found wrong switch delivered. I had to pay him again to install the switch when the right one came.
Bill N - March 2, 2021
Verified Purchase
Great part. Wiring the same as for original part
The part was delivered very quickly and worked perfectly.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Terminals on new switch were completely different
finally figured it out , but instruction sheet could have shown old switch terminals & new switch terminal locations.
Other Parts Used:
-
christine from northampton, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
18 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch was Shot!
Took out the three screws that holds the front control panel together. Let loose the old switch put the new one in its place, and changed the wires over one by one with old/new switch conversion chart! Piece of Cake, Kinda
Other Parts Used:
-
Robert from Felda, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
11 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
September 23, 2019
Need wiring instructions to install replacement switch 8203536 which replaces switch 9751758.
For model number YKERC607HW5
Hi Barry, thank you for your question. Unfortunately the manufacturer has not provided that information. However, even though the terminal positions are not in the same place they are all labeled the same. For example, the L1 wire on your old switch should go into the L1 on the new switch. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS972603
Manufacturer Part Number: 8203536
Manufacturer Part Number: 8203536
Brand
Model Number
Description