OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
Part Videos
Watch our pros, then fix it yourself.
Replacing your KitchenAid Dishwasher Spinner Kit
About this fix
Common problems and models this part fixes.
Really Easy
15 - 30 mins
Rated by verified customers
What this part fixes:
Not cleaning dishes properly
Works with the following products:
Dishwasher
Part# 8193983 replaces these:
AP3775842, 1059750, 8193983, 8557720
Customer Reviews
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
33 Reviews
4.9
Out of 5
5 Stars
30
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard H - November 28, 2021
Verified Purchase
Fit perfectly
Easy to order. Fit perfectly. Received rapidly.
★★★★★
★★★★★
Dustin S - May 25, 2020
Verified Purchase
Worked great, quick shipping
Working perfectly
★★★★★
★★★★★
Gord W - February 26, 2020
Verified Purchase
Part as requested. Works great
Excellent quality part and fast shipping. Thanks
★★★★★
★★★★★
Rick S - February 26, 2020
Verified Purchase
PartSelect ROCKS!
Arrived next day and got me away from doing the dishes in no time flat!
★★★★★
★★★★★
Pasquale P - January 14, 2019
Verified Purchase
Great price and fast delivery.
Amazing price and service.
★★★★★
★★★★★
Gary R - July 17, 2019
Verified Purchase
1 day shipping
Part as described. Watched a video which made installation easy.
★★★★★
★★★★★
Richard T - August 31, 2019
Verified Purchase
Thank God for this website
I finally found the part and installation instructions here. Had it shipped next day... so it only took day to get the machine back up and running right. The service called with it takes a whole lot longer and been a lot more expensive
★★★★★
★★★★★
David J - June 16, 2019
Verified Purchase
Super easy repair was the right solution
We ordered the part in anticipation that it would solve our problem. The part arrived in two days and we installed it that night and our dishwasher works like a dream thank you !
★★★★★
★★★★★
John V - October 2, 2019
Verified Purchase
Simple part doing a great job
It was easy to order by googling Brand and Part number. Arrived quickly in the mail. Works like a charm!
★★★★★
★★★★★
Gary V - March 14, 2019
Verified Purchase
Easy repair
Was happily surprised at the quick delivery the next day!
Prev
1
2
3
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Really Easy
15 - 30 mins
Average repair rating from 17 real customers like you
Sort by:
Prev
1
2
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
spinner kept falling off
95 of 111 peoplefound this instruction helpful.
paul from erie, CO
Really Easy
Less than 15 mins
Screw drivers
i removed the top screw for the water input to the spinner, which gave me enough room to replace the worn nipple pin that the spinner snaps on to. then snapped the new spinner in place. and then screwed everything back into place.
Was this helpful?
Thank you for voting!
Borke the spinner off with dishes that were too tall. (Oops!)
47 of 48 peoplefound this instruction helpful.
Stephen from Leavenworth, KS
Really Easy
Less than 15 mins
Screw drivers
1. Put a towel over the bottom of the machine. (In case you drop the screw... duh!)
2. Remove the top screw.
3. Replace the snap pin (pointy end DOWN.)
4. Snap the spinner in place.
5. Replace the screw. (Or go to the hardware store to replace the screw you dropped into the bottom of the
... Read more dishwasher. Dashitall!)
Read less
Was this helpful?
Thank you for voting!
water not spraying right.
33 of 187 peoplefound this instruction helpful.
Frank from Davenport, IA
A Bit Difficult
30 - 60 mins
Socket set
removed parts and the ordered the parts. It was very easy to order parts from Partselect. I unscrewed a few screws and the disassembly was a breeze. I then revresed my steps and the new parts were instlalled no problem. Now on the the motor replacement. Thanks Partselect.com
The upper spinner was laying in the top washer basket. I went online but no help was avaiable. Went to store where we purchased dishwasher and they gave me part number to order but not online I had to call to order. Part arrived in about three days. I took two screws loose on the top of dishwasher removed broke retainer to put new retai
... Read morener in but I drop it into dishwasher so you have to me very careful so I tried to order just the retainer but is not sold by it self. Had to order whole new kit. Other than that it is easy dishwasher runs like a new one.
Read less
Was this helpful?
Thank you for voting!
Not cleaning well, Top spray arm not spinning. Chopper not turning
10 of 17 peoplefound this instruction helpful.
Steven from Phoenix, AZ
A Bit Difficult
1- 2 hours
Pliers, Screw drivers, Socket set, Wrench set
Disconnected power to dishwasher. Removed water supply hose from inlet water valve. Removed lower and upper racks. Removed Lower spray arm. Removed tube from pump tp top spinner. Pulled dishwasher from under cabinet (remember to tip to get back out!). Placed dishwasher on its back. Removed electrical connectors from water valve, main
... Read more motor and drain motor. Removed drain hose from drain pump. Removed pump/motor assy by pulling out wedges and pushing assembly into dishwasher. Removed pump/motor assy from inside dishwasher. Cleaned out pump. Installed new chopper. Re-install pump/motor assy. Re-install driain pump hose. Re-connect the pumps and water valve electric connectors. Slide dishwasher near cabinet for re-install. Re-connect drain hose to dishwasher. Re-install dishwasher under cabinet.Reconnect water supply. Removed top spinner from tube. Installed new spinner onto tube. Re-install tube onto main pump (below lower spray arm). Clean out and re-install lower spray arm. Remove middle spray arm from top rack. Clean out spray arm. Re-install spray arm with a new gasket (gasket may have not been needed). Re-installed lower and top racks. Re-connect power supply. Position all three spray arms pointing towards the door to confirm they were turning. Tested dishwasher - confirmed fill, wash, and drain properly. Also confirmed that all three spray arms were turning. Machine is washing, draining and running great since!
I am a 61 year old woman and it took me a total of 2 min. max. Popped it into place and pushed in button that holds it..Taa Daa...perfect!
Was this helpful?
Thank you for voting!
Upper rack not getting clean.
6 of 7 peoplefound this instruction helpful.
thomas from FULLERTON, CA
Easy
1- 2 hours
Watch your video about my dishwasher symptoms. Move water tube for upper rack to the right and release lower spray arm. Remove 4 clutch head screws from filter cover and remove. Dig out 10 years of undisolved soap and reassemble.
Was this helpful?
Thank you for voting!
The Spinner at the top of the dishwasher came off and would not stay on.
5 of 5 peoplefound this instruction helpful.
Ronald from SARATOGA SPGS, UT
Very Easy
Less than 15 mins
First of all I appreciate the instructions provided by this site when I selected the part I needed! The installation was so easy. I popped the end caps off of the top rack guides and removed the top rack. I reach in and popped the clips holding the top sprayer bar and gently pulled down on the sprayer bar enough to place the spinner bu
... Read moretton in the top of the sprayer bar. Then pressed the spinner on the bottom of the sprayer bar into the button I place in the top of the sprayer bar and reattached the sprayer bar to the clips. Put the top rack back on the guides and replaced the guide caps and it was finished. Easy fix thanks to this site great instructions!
Read less
Was this helpful?
Thank you for voting!
top spinner fell off
5 of 9 peoplefound this instruction helpful.
Eugene from Scotch Plains, NJ
Really Easy
Less than 15 mins
Screw drivers
I followed another story for the same repair. Worked great.
Was this helpful?
Thank you for voting!
Top spinner kept coming off due to worn bushing
4 of 4 peoplefound this instruction helpful.
Lester from Aguanga, CA
Really Easy
30 - 60 mins
Screw drivers
I Removed the upper wash rack by removing locks on each front slide of rack. I laid a towel in the bottom of the washer to keep anything dropped, retrievable. I then removed the top screw closest to the spinner location. I then carefully pulled down on the mounting, which exposed the bad bushing lock. I removed the old bushing lock an
... Read mored replaced with new one. I then replaced the spinner with a push with one hand while holding the bushing in place with the other hand. You will feel a snap as all goes into place. Make sure new spinner spins freely. Now reinstall removed screw. Do not over tighten. Now reinstall lower rack, carefully aligning water feed in rear of washer, and making sure all rollers are back in sliding rack. Reinstall locking tabs onto sliding rack. Now slide out rack, it should not come off slider. Important: now remove the towel in the bottom of the washer. If left in place, you will have a fire during the drying cycle. Close the door and test your washer through a cycle. I felt confident and did a load of dishes. If all went well, spinner should be in place, not in the bottom of the washer.
Read less
Was this helpful?
Thank you for voting!
Prev
1
2
Next
DIY Questions and Expert Answers
12 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathleen - For model number DU1048XTPQ0
January 3, 2018
The spinner fell off in my dishwasher and i would like to know if i can purchase just the barbed spinner holder or do i have to purchase the kit. The spinner is perfectly fine, i would probably want a few of the barbed spinner holders if this is something that will fall off more than just one time(or knocked off by a careless dishwasher loading person lol.)
Hi Cathleen,
Thank you for your question. Unfortunately you would have to replace your spinner kit. I hope that helps. Good luck with your repair.
23 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Eugene - For model number KUDK03FTBB3
July 22, 2017
My problem is i am not getting sufficient water to the middle spray arm and the top spinner. I ordered and replaced the tube, middle spinner, it's seal, and the top spinner. The old replacement parts were corroded and caked with dry dish powder. I am still not getting sufficient water to the middle and top rack. Is it possible the pump is clogged? If i need to clean or replace the pump, do you have remove and replace instruction on how to do this for my model?
Hello Eugene,
Thank you for sending in your question, looking through the symptoms for this model and other customers comments they have replaced the Circulation Pump and Motor part number PS11757388. There is a video on the site on how to install this Pump and Motor and it should be of some help for you.
Hope this helps!
11 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
David - For model number MBD7749SBQ
November 27, 2019
When we run the dishwasher, this spinner falls off. I push it back on, but it falls off each wash. Would it help to replace it, or is the problem with the part it connects to?
Hello David, thank you for your question. We would recommend replacing the spinner itself. I hope this helps.
6 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
CATHY - For model number KUDS35FXBLA
April 10, 2019
Dishes on upper rack do not get clean
Hi Cathy,
Thank you for your question. If the dishes on the upper rack are not getting clean, there are some things that you will need to check to see what is causing the issue. There may be something blocking the spray arm preventing the water from reaching the upper rack. Check to make sure that there are no obstructions. If the dishwasher is overloaded, this can prevent your dishwasher from cleaning properly. The holes where the water comes out of on the spray arm may be clogged and you will either have to clean the holes out or replace the spray arm. If the dishes are not placed correctly in the rack, this can prevent them from being cleaned properly. Cups and bowls should face down or otherwise water will collect in them. The face of each dish should face toward the center of the dishwasher. Place glasses between spindles rather than on or over them so that water doesn't get trapped. If the water pressure is low going into your dishwasher the dishes on the top rack may not get clean. This can be caused by a kink in the dishwasher hose or low water pressure to your home. If it happens only occasionally, it may be caused by other appliances or activities using water, such as the clothes washer, bathtub and sprinklers. I hope this helps. Thank you and have a great day!
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Teresa - For model number DUI300xtvb2
October 7, 2019
The top spinner fell off; will the dishwasher work without the top spinner kit while we wait for the repair?
Hi Teresa, thank you for your question. It should work though you might have an excess of water coming from the tube at the top where the missing spinner is. So you may see a decrease in the quality of the dish wash. I hope that helps. Good luck with your repair.
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Rita - For model number 8193983
November 12, 2019
I need a video on how to put this part back in for the dishwasher
Hello Rita and thanks for writing.
We have attached the link to our repair video. We hope this helps. Please contact us anytime.
https://www.youtube.com/watch?v=z0rPfElzIPA&feature=emb_title
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Wanda - For model number DU1055XTVS3
October 3, 2019
Top spinner and spray arm do not turn.
Hello Wanda, thank you for your question. The first thing we recommend doing is removing the top spinner and cleaning it very well. Make sure its attached securely and that the part is not clogged. It would also be a good idea to check under the bottom spray arm for any clogs or debris that may be down in the sump, if the sump is clogged the water will not be pushed through to the other spray arms. If these sections are clear, we would recommend checking the back manifold tube, and where it connects to the bottom of the dishwasher. I hope this helps!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Deb - For model number KUDS40CVSS3
January 9, 2019
The top rack items aren't cleaning well at all. Could it be the top spinner center part or the entire top spinner part.Should the top spinner mechanism wobble at all?
Hi Deb,
Thank you for your question. If the dishes on the top rack are not getting cleaned, then it could be the top spinner. The top spinner should not be wobbling and it should run smoothly. Make sure the holes in the spray arms are not clogged with debris. Make sure the water is hot when using the dishwasher. Run the water in the tap for a few minutes until it is good and hot and then run the dishwasher. Make sure there is adequate water pressure going to the dishwasher. Also, check to make sure the heating element in the dishwasher is working correctly if not, this can prevent the dishes from getting cleaned correctly. How you arrange the dishes in the dishwasher is important as well. If they are arranged in a way that will prevent the water from reaching the dishes on the top rack, then this will prevent them from getting cleaned. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the chopper assembly, the spray arm seal, the sump pump check valve, the impeller and seal kit, the circulation pump and motor, the water supply manifold probe, the lower spray arm, the feed tube and the sump and motor assembly. I hope this helps. Thank you and have a great day!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Stan
August 8, 2018
Where does the flapper go,it is rubber with a 2 hole flapper
Hi Stan, Thank you for your question. We do actually have an installation video for this spinner kit. Here is the link: https://youtu.be/z0rPfElzIPA . Good luck with your repair.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Wayne - For model number KUDS03STSS0
February 18, 2020
My dishwasher is leaking out the top of the door. I replaced the gasket but it did not stop.
hello Wayne, Thank you for the question. We suggest checking or replacing the Dishwasher Control Panel Seal, PartSelect Number PS11746208. We hope this helps.
My Orders
