Upper Rack End Cap WD12X10184

Official part for General Electric

Really Easy 

Less than 15 mins 

958986-1-M-GE-WD12X10184 -Upper Rack End Cap
Part Location Diagram of WD12X10184 GE Upper Rack End Cap
See part 652 in the diagram
( Grid squares measure 1x1 inch )
958986-1-S-GE-WD12X10184 -Upper Rack End Cap 958986-2-S-GE-WD12X10184 -Upper Rack End Cap 958986-3-S-GE-WD12X10184 -Upper Rack End Cap Part Location Diagram of WD12X10184 GE Upper Rack End Cap
Proudly Canadian
OEM badge Official OEM Part
$23.79
Special Order

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Upper Rack End Cap Specifications

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.
Part #WD12X10184
Manufactured by GE for General Electric

You May Also Need

Because heroes deserve fewer surprise re-installs.

$46.95
Special Order
$114.66
Special Order
$79.62
Special Order
Upper Rack Wheel – Part Number: WD35X21036
Upper Rack Wheel
Part #WD35X21036
No Longer Available
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Really Easy 

Less than 15 mins 

Rated by verified customers

Works with the following products:
  • Dishwasher
Part# WD12X10184 replaces these:
AP3767716, 1057214, WD12X10123

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

Less than 15 mins 

Average repair rating from 6 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Broken drawer slides
21 of 31 people found this instruction helpful.
  • steve from ramsey, MN
  • Really Easy
  • Less than 15 mins
The repair was very easy, I just had to replace some bad bearing slides in the drawer pull. Remove the end cap, remove the top drawer, remove the old bearing slide from the drawer slide and snap the new one in. finally replacing the end caps.
Ordering the parts was easy and delivery was fast.
Was this helpful?
Thank you for voting!
ball bearings falling out of the upper dish rack
6 of 13 people found this instruction helpful.
  • George from Cincinnati, OH
  • Really Easy
  • Less than 15 mins
pulled the end caps, pulled the upper dish rack out. Installed the rear end cap on the right hand side of the inside slider for the rack. installed the bearing and slider in position. Put the upper rack back in and installed the front end caps.
Was this helpful?
Thank you for voting!
Top rack was getting stuck when sliding out.
5 of 21 people found this instruction helpful.
  • Karl from Ke West, FL
  • Really Easy
  • Less than 15 mins
  • Pliers
Pulled out the rack installed new slides, rollers and endcaps,It was a snap !
Was this helpful?
Thank you for voting!
Top tray would pull out due to stops being worn and missing. Also bottom rack had missing rollers
3 of 4 people found this instruction helpful.
  • Jay from Lynnwood, WA
  • Really Easy
  • Less than 15 mins
Removed racks and replaced snap in rollers in bottom shelf and installed new stops in top rack.

No tools needed
Was this helpful?
Thank you for voting!
No video for this new version of the part
1 person found this instruction helpful.
  • Ellen from DOVER, DE
  • Easy
  • 15 - 30 mins
The entire flat side of the end cap, (with the cutout latch), goes on the outside of the guide bar. It took less than 15 seconds to insert. It took about 30 minutes of searching for videos and playing around with the part to figure this out. A simple diagram would have been helpful.
Was this helpful?
Thank you for voting!
Dishwasher was missing a few elements . . .
1 of 6 people found this instruction helpful.
  • caroline from Flagstaff, AZ
  • Really Easy
  • Less than 15 mins
Ordering was a breeze, the diagrams made it simple! Parts were ordered, parts were shipped, received and installed. Wonderfully easy.
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WD12X10184
Brand
Model Number
Description
General Electric
CDW9380N00SS
Dishwasher - GE CAFE
General Electric
CDW9380N20SS
Dishwasher
General Electric
CDWT980R10SS
Dishwasher
General Electric
CDWT980R30SS
Dishwasher
General Electric
EDWF800P00BB
Dishwasher
General Electric
EDWF800P00WW
Dishwasher
General Electric
EDWF860P00SS
Dishwasher
General Electric
GDWF100R10BB
Dishwasher
General Electric
GDWF100R10WW
Dishwasher
General Electric
GDWF100R30BB
Dishwasher
General Electric
GDWF100R30WW
Dishwasher
General Electric
GDWF106V00WW
Dishwasher
General Electric
GDWF160R10SS
Dishwasher
General Electric
GDWF160R30SS
Dishwasher
General Electric
GDWT100R00BB
Dishwasher
General Electric
GDWT100R00WW
Dishwasher
General Electric
GDWT100R05BB
Dishwasher
General Electric
GDWT100R05WW
Dishwasher
General Electric
GDWT100R10BB
Dishwasher
General Electric
GDWT100R10WW
Dishwasher
General Electric
GDWT100R30BB
Dishwasher
General Electric
GDWT100R30WW
Dishwasher
General Electric
GDWT106V00BB
Dishwasher
General Electric
GDWT106V00WW
Dishwasher
General Electric
GDWT160R00SS
Dishwasher
General Electric
GDWT160R05SS
Dishwasher
General Electric
GDWT160R10SS
Dishwasher
General Electric
GDWT160R30SS
Dishwasher
General Electric
GDWT200R10BB
Dishwasher
General Electric
GDWT200R10WW
Dishwasher
Upper Rack End Cap
$23.79
Special Order
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.