This is the replacement left front orifice for your gas range. When your range is operating, gas flows through the orifice to the igniter. This part is the orifice itself as well as the metal holder that holds it in place. If you notice a gas smell when your range is on, you could have a loose or damaged orifice. This part fits the front left burner in your range, so make sure you are replacing the correct orifice. This is an OEM part sourced from the manufacturer and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas smell
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB28K10190 replaces these:
AP3775376, 1086493
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
loss of spark to two burners, and bent orifice holder
unplugged the old spark module and plugged the new one in. Disassebled and reassembled the new orifice holder.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no problems it was very easy the parts were a perfect match
first you have close the main gas line, then you remove the nut in the center of each burner then you have to push in the two tabs located in the front part of the stove. one on each side of the out side burners. then you lift the top of the stove. then you will need a wrench to loosen the nuts on the tub. then you have to line up the new ones. put the stove top back on then you have to put the nuts on each burner then you can test for gas leaks
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derrick
December 23, 2017
I recently installed a new igniter. When I preheat to 325 degrees I smell gas. What part needs replacing to remedy the gas smell?
For model number RGB790DET1BB
Hello Derrick,
Thanks for your question. You may also want to test the flat-style oven igniter with a multi-meter to see if it has continuity, and replace it if it is not showing continuity. We would also advise to clean the manifold assembly and check if there are any cracks or leaks with the pipes. Be very cautious not to use any open flames around the oven.
I hope this helps.
Item ps954084 left front orifice. Is this the tube and orifice and is the orifice for natural gas or lp
For model number Jgbp33weh3ww
Hello Richard, Thank you for the question. This is the Left Front Orifice and tube assembly for Natural Gas. We hope this helps!
Was this helpful?
Thank you for voting!
Joseph
February 26, 2022
I am looking for a orifice tube for a stove, I do not see one listed. I know this may sound stupid how do you tell left from the right looking from the front to back or do you look from the back to front for L/R. Thank You
For model number RGB533WEH5WW
Hello Joseph, Thank you for the question. It will be your left or right as you stand in front of the appliance looking at it. Please submit a new question letting us know what part you need and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stove top. Be sure to di...
This front orifice, also known as a burner tube, is a genuine OEM replacement part for your gas stovetop. To replace the burner tube, first shut off power to the stove. Remove the burner grates, caps, and bases. Remove t...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS954084
Manufacturer Part Number: WB28K10190