Rod-push 692011

Hello Bill, thank you for your question. We are unclear as to the cause of the rocker arm not moving. The correct Exhaust Push Rod is PS9066108. The Rocker Arm is PS9063405. There is a testimonial on our site on how a customer did his repair. We hope this helps. Remove valve cover. Remove rocker arms and rocker arm bolt stands. Remove and replace push rod guides. Reinstall rocker arm stands and rocker arms. Install push rod in correct position.(Make sure you put the Aluminum rod in the Intake position and the Steel rod in the Exhaust position) Adjust clearance as required. Reinstall valve cover and gasket. Run engine and check for oil leaks. Good luck with this repair.