Compressor Start Relay 8201647

The manufacturer has redesigned this part and I found it difficult to attach and install compared to the part that I removed from my fridge. As I found out, it might be impossible to remove this part once it is installed. I hope that this part lasts the life of the fridge because I don't think I will be able to remove it from the compressor and probably won't be able to remove the power connector since it has also been redesigned. It was extremely difficult to attach the capacitor to this new start relay. The plastic pieces that are supposed to fit together did not fit properly. I had to force the capacitor onto the relay and I noticed that it would be very easy to crack the plastic case of the capacitor if you are not careful. The start relay has a new part number which makes it a little confusing to find a replacement part if you are reading the parts diagram and don't have a cross-reference chart. The new retaining clip doesn't seem to fit as snug as the old one that I had to remove, but not a major problem. This is the first time that I have had to repair my fridge and these were all of my observations. The repair took a lot longer than it should have, because of problems with badly fitting parts, but the good news is that this start relay got my fridge working again.