Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
September 7, 2023
the two small black strips with small bearings on the freezer upper drawer slide..how do you properly install them?
For model number PWE23KSDFSS
Hi Jerry, thank you for reaching out. According to our research, you may need to follow these instructions to install these bearings. These may not be of the same model, but will help you with the installation. To install a slide bearing, you may follow the following steps: open the freezer door, then pull the upper drawer forward and tilt up and out to remove it. Remove the lower drawer by pushing it back slightly, then tilt the front up and out. Using a nut driver, remove the screws holding the door. Tilt the door forward and lift up and out. Use a screwdriver to remove the retaining screws for the slide rail. Remove the slide rail from the freezer. Each drawer rail has three slide bearings that press into place. Use a screwdriver to lift up on the end and then carefully push out the bearing. To install the new slide bearing, simply align it with the rail and then push it in until you hear it click into place. Once the new bearings are in place position the drawer slide rail against the wall of the freezer, then thread in and tighten the retaining screws. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8758357
Manufacturer Part Number: WR17X13195