Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George Grech
July 8, 2019
No light on panel and it does not turn on
For model number Gdf520psf4ss
Hello George, thank you for writing. For this symptom you will want to consider either the Door Latch part PS6447681, the Latch Striker part PS8690622, or the Main Board Kit part PS11721500 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Lachlan
August 15, 2019
My dishwasher isn’t heating or drying dishes. The water flow appears fine (everything’s wet). I did notice that the control panel stopped beeping, but i think that happened a little before it stopped drying dishes. I replaced the heating element (ordered through you guys) because it was a cheap part to throw at it, with no success. I also replaced the water valve (because it was 5yrs old and dirty). Leaning towards the control panel or main board. Does the lack of beeping help pinpoint the possible cause of failure. All the lights and buttons work on the control panel. Thanks for you assistance.
For model number GDF520PSF2SS
Hi Lachlan, thank you for your question. The parts to check in a situation like this would be your heating element, your wiring, and your control board. You will want to inspect the wiring to see if there is any damage or burn marks. Since you have already replaced your element, you might need to look at your control board being the issue if the wiring is fine. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.