Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner Valve stopped working
Turned off gas, then lifted up the burner cover and removed the old valve using a screw driver to loosen the clamp. I also had to remove the face plate using a socket set (4 screws). I didn't align the valve using the existing valves as a guide and also didn't get the clamp tight enough. So I re-aligned the valve to match the other valves and also tighten the clamp enough as best I could to prevent gas from leaking.
Other Parts Used:
Brian from BRADENTON, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
April 7, 2023
my igniters keep on clicking when the stove is not operating
For model number jgb660sej4ss
Hi Steve, thank you for reaching out. The most common cause of this issue is that food debris can get lodged around the ignition system. It just needs a good cleaning. After cleaning the ignition system, if it does not solve the problem, then you need to check the spark ignition switches and harness, part number PS12702961. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
December 20, 2022
The valve for the large burner will not turn. Is this valve the same as other three?
For model number JGBS66DEK4WW
Hi Kevin, thank you for the question. The Burner Valve for the large burner is part number PS8754416. The other valves are not the same. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.