Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debbie
November 9, 2022
E-15 errror … what parts need ? Float switch and float? Shut off from breaker now no code show up but can here dishwasher draining no water in tub
For model number Shp65t55uc/09
Hello Debbie, thank you for reaching out. The E15 error code indicates that the safety switch has detected water in the base of the dishwasher. We recommend that you check if there is any clogging in the drainage system. Also, check if the drain pump, microfilter, check valve, and float switch are damaged, and replace the faulty part. If you require assistance to place an order, please contact customer service. We hope that helps!
If I know that the dishwasher is receiving power, would this part keep the display from showing power? The dishwasher was working all day today and I was doing the final load and out of nowhere it shows no power, it is not the circuit breaker, I checked, the garbage disposal is on the same circuit and it works. It just has no display led anywhere on display that show's power. It finished the cycle and auto turned off, I emptied the previous load and reloaded and went to turn on.Nothing!
For model number SHP65T55UC/02
Hi Bruce, Thank you for the question.I suggest replacing the switch first,if this did not fix the issue the Control Unit, PartSelect Number PS8737042 may need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 24, 2019
My wife spilled nail polish remover on the control panel. The panel is somewhat melted and some of the buttons melted/stuck (e.G, start button). What do I need to order to replace the top trim panel, the buttons and probably the underlying control panel? Thanks.
For model number SHP65T55UC/02
Hello Mark, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8737362 for the top trim panel and Part #: PS8737224 (2 required) and Part #: PS8729291 for the push buttons. Hope this helps!
Have an e:06 changed the board the motor for heat was working only would not heat upon changing the pump can’t get it to fill or run
For model number Shp65tl5uc/07
Hi Mar, thank you for reaching out. We recommend checking both turbidity sensors, part numbers PS8727345, and PS8727394, to fix the issue. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
i am receiving error code E:23. I have cleaned the filter, the trap, and even the waste hose. What could be the culprit?
For model number SHE3ARF2UC/22
Hello Jerry, thank you for contacting us. The E23 error code indicates that there is an issue with the drain pump. This happens when the drain pump is blocked, clogged, or faulty. As you have cleaned the filter and hose, replacing the drain pump, part number PS11704799, is the most likely solution. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
I have code E19. Will this part fix it? If not, what will fix it?
For model number SHP65TL5UC/07
Hi Pete, thank you for reaching out. If the E19 error code appears on the appliance display, it means that there is a problem with the internal valve, dispenser, or control board. To fix the E19 error, clean the drain and clean up any leftovers. If this does not help, please check the water inlet valve, part number PS16746057, the dispenser assembly, part number PS11724987, the drain pump, part number PS11704799, and the power board, part number PS12729828. Please test these parts and make sure none of them is shorted. We hope this helps, good luck with the repair!
The start button works, but is hard to push in and sometimes sticks. Does this mean the switch needs to be replaced?
For model number SHE3ARF6US/22
Hello Patti, thank you for the question. According to our research, you may need to replace the start button, part number PS8727410, to fix the issue. We hope this helps!
My Start/Resume switch sometimes doesn't want to work. Can I replace it with PS8728608 or do I need to replace the entire control panel. If I need to replace the entire panel what is that part number?
My dishwasher model number is SHS5AV52UC/22
under that is
FD961200267
and under all that is
SN6AP5B
Hopefully one of those numbers is what you need to answer my question
For model number SHS5AV52UC / 22
Hello Larry, thank you for the question. The part you have mentioned is the on/off switch. Start/resume switch comes along with the control panel. The compatible control panel for your model is part number PS11732295. We hope that helps!
I am getting the E24 code on the above dishwasher. I have changed the pump and replace the drain line and still getting the code. The unit appears to be draining fine, it only happens toward the end of the cycle. Any idea what it could be at this point??
For model number bosch shem63w55n/20
Hi Christian,
Thank you for your question. If you have replaced the hose and the pump and you are still getting the E24 error code, we would recommend cleaning the filters. We hope this helps!
