HANDLE-STRIP 00489674

By way of the circuit breaker. I first turned off the electricity to the dishwasher.
I removed all of the screws from the front cover, three down each side, and removed the cover exposing the front screws holding exterior control panel, I removed those screws and the screws on the back side of the panel and removed the panel.
I took all of the control buttons from the broken piece and installed them and the handle strip to the new piece. I then put the new panel in place and using the original screws secured it to the machine.
Also using the original screws, I secured the front cover to the machine.
I turned the electricity on to the dishwasher and ran a test cycle. It worked and the handle opens the machine the way it was designed.

Small child messed with keyboard during order process. Wrong part was ordered by mistake. Cancelled online order immediately as instructed online at Part Select. Those idiots still sent the wrong part anyway and I had to return repair part at my expense. These people don't bother to follow their on rules. Never would I order a repair part from these people again. I would rather just buy a new machine than use Part Select.