Average Repair Rating: 4.6 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broken door opener
take six screws out of the front panel and remove the panel. remove four screws from the top handle cover that are underneath than remove it and put the buttons in the new piece . than snap the new handle cover back in place and put the four screws that hold it back in. put the front panel back on and you are done
Removed 6 screws from front metal cover, removed 4 screws holding panel-facia in place. installed new "buttons" on new panel-facia, snapped into place, then place panel-facia into place and attached with 4 screws. using 6 screws attached front cover to dishwaher door. Have to remove cover in order to remove the panel-facia. very easy job and one person can do it. you do need the star design bit for the screw heads
1. Open the door and remove the three lowest screws on each side. 2. Close the door and remove the front panel by pulling down and out. 3. Remove the four screws that hold the fascia in place. 4. Partially open the door and remove the fascia by lifting and wiggling at both ends. 5. Remove the broken button. Mine was in two pieces. 6. Snap the new button in place. 7. Replace the fascia, taking care to get each tab back in its slot. 8. Replace the four screws holding the fascia in place. 9. Replace the front panel by pressing it in and up. 10. Replace the screws holding the front panel in place.
Other Parts Used:
James from KNOXVILLE, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sarah
May 8, 2023
Does this button come in gray/silver? That is the color I need to replace the button that was broken off. Thank you!
Hello Sarah, thank you for the query. According to our research, the mentioned on/off switch, part number PS8714198, comes in black. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
March 12, 2018
Is this the button that's over the top of start switch and is the color black?
For model number she43rl6uc/64
Hello Rick, thank you for your question. The button part number 00427746 is the black button that inserts into the control panel for the on/off button on the left hand side of the control panel. This part number 00649314 is for the button kit for the buttons on the right side of the control panel. Good luck with your repair!
Was this helpful?
Thank you for voting!
Aaron
February 1, 2019
Is this the button that's over the top of start switch and what is the color ?
For model number SHE43R55UC/64
Hi Aaron,
Thank you for your question. The color of the button is black and this is the button on the left hand side of the control panel that would go over the on/off switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8714198
Manufacturer Part Number: 00427746
