Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Timothy C - November 18, 2022
Verified Purchase
Bosch float switch
Great shipping time and part was received exactly as ordered. I would certainly do again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Not getting water
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done
Other Parts Used:
Ranaye from BECKER, MN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
December 20, 2018
It appears that the dishwasher is not filling completely, or as much water as needed. Pump runs out of water before reaching correct pumping pressure. If i add about a quart of water it works correctly. Could the float switch be sensing too soon? Any ideas?
For model number SHE55M16UC/64
Hi Lawrence,
Thank you for your question. If the dishwasher is not filling with water, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the valve access, the water inlet valve and the float switch. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
August 19, 2019
My dishwasher works great but after the cycle is finished, water comes back in the dishwasher. What should i do?
For model number SHU43C05UC/14
Hello Tony, thank you for inquiring. You will want to replace either the Water Fill Sensor Assembly part number PS8723739 or this Float Switch part number PS8697040 for your model to fix this. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Harold
December 23, 2023
Water wouldn’t go into the dishwasher. I disconnected the hose from the water supply, ran the water and it was full of rust. Is there a filter on the dishwasher that may need replacing?
For model number SGS3022/12
Hello Harold, thank you for getting in touch. According to our research, you may need to check the filter of the water inlet valve to solve the problem. The filter does not come separately. It comes with the sealing, part number PS8697172. Glad to be of help!
This is a replacement water inlet valve for your washer. The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washin...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8697040
Manufacturer Part Number: 00165256
