Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Timothy C - November 18, 2022
Verified Purchase
Bosch float switch
Great shipping time and part was received exactly as ordered. I would certainly do again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Not getting water
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done
Other Parts Used:
Ranaye from BECKER, MN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
December 20, 2018
It appears that the dishwasher is not filling completely, or as much water as needed. Pump runs out of water before reaching correct pumping pressure. If i add about a quart of water it works correctly. Could the float switch be sensing too soon? Any ideas?
For model number SHE55M16UC/64
Hi Lawrence,
Thank you for your question. If the dishwasher is not filling with water, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the valve access, the water inlet valve and the float switch. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
September 4, 2025
Overnight my Bosch dishwasher overfilled and spilled out to floor. When I turned dishwasher on the pump drained the water. When I try differant wash cycles the timer shows up but it does let any water in. Left idle water keeps coming in slowly.
For model number SHE98M05UC/52
Hi Robert, thank you for contacting us. The issue seems to be with the float switch, part number PS8697040. Its function is to shut off the water supply when the correct water level is reached and prevent the dishwasher from overflowing or failing to initiate cycles because of improper water levels. You may need to replace it to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roderick
April 8, 2025
Does the float switch Assembly include the float switch that is referenced in the three parts your site states are needed when dishwasher won't fill with water or does it have to be purchased separately
For model number DW44ZP
Hello Roderick, thank you for your inquiry. The parts are all sold individually. The switch is PS8697040, the white float is PS8697065 and the red float is PS8697050. Good luck with your repair.
My dishwasher works great but after the cycle is finished, water comes back in the dishwasher. What should i do?
For model number SHU43C05UC/14
Hello Tony, thank you for inquiring. You will want to replace either the Water Fill Sensor Assembly part number PS8723739 or this Float Switch part number PS8697040 for your model to fix this. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
Harold
December 23, 2023
Water wouldn’t go into the dishwasher. I disconnected the hose from the water supply, ran the water and it was full of rust. Is there a filter on the dishwasher that may need replacing?
For model number SGS3022/12
Hello Harold, thank you for getting in touch. According to our research, you may need to check the filter of the water inlet valve to solve the problem. The filter does not come separately. It comes with the sealing, part number PS8697172. Glad to be of help!
This is a replacement water inlet valve for your washer. The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washin...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
