Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would finish before clothes were dry
Took it apart including taking drum out. Heating coils were ok, so an experienced friend suggested the PC control board. I vacuumed out the inside frame, air duct, re-glued some loose foam seals and also lubricated the sleeve bearing. When the parts came in I put it back together with the new belt and PC board. The dryer works correctly now.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bud
July 14, 2021
Dryer does not shut off on any auto-dry settings. Clothes are hot and dry but cycle never ends. Timed setting works fine. Cleaned moisture sensing probes. Good continuity from control board to end of upper probe. Good continuity from end of lower probe to ground. Tried measuring upper probe voltage when running with dry clothes and barely got a reading, under 1v. Seems to me that points to a bad control board. Are there any additional tests I should do to prove my theory. I don't want to spend $80 just guessing. Thanks so much.
For model number DPSR610EG7WT
Hello Bud, Thank you for the question. With the information we have it would suggest the control board is defective. There is no additional tests to be done unfortunately without having a repair man come in and see the appliance. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS755814
Manufacturer Part Number: WE04X10102