This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Crosley.
Part# 131789200 replaces these:
AP2107628, 890102
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
October 15, 2019
Timer will advance on time settings but will not when set on towel mode
For model number feq332ceso
Hello Brian, thank you for writing. You will most likely need to replace the Timer, this part number PS645294 for your model. You may also want to consider the Thermostat, part number PS419278. Good luck with your repair!
Was this helpful?
Thank you for voting!
Arnold
March 15, 2023
Does this timer replacement will fix the dryer not heating up properly, The timer cycle works fine it just the heat is not as good as before, Lint ducting is clean, heating coil is good. but the technician said its timer need to replace.
For model number FEQ332CES0 Dryer
Hi Arnold, thank you for your question. According to our research, we suggest you keep the dryer several inches away from the wall for a proper flow of air. You also need to check the heating element assembly, part number PS418120, which might be defective, and the thermal limiter, part number PS419402. We hope this solves your problem!
When timer is turned dryer tries to start immediately start switch has already been replaced thermal resistors all tested good at 0 ohms
For model number Gleq332as2
Hi Matt,
Thank you for your question. If the dryer is not starting, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the timer knob, the motor, the switch, the belt, the rear drum bearing kit, the terminal block, the door catch and the high limit thermostat. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
