The control board sends electronic signals to the burners when you select the cooking time or temperature.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Wall Oven, Range.
This part works with the following products:
General Electric.
Part# WB27T11430 replaces these:
WB27T11353
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
November 19, 2019
My oven control number pad has several numbers as 3,5, 7 & 9 that appear to stick or not activate when touched. It may take several tries before able to enter a temp setting and start key to get panel to work. This affects both upper and lower ovens when attempting to set temp or times. Is the part # control ui, ps5573482 the correct part for correcting problem. All other keys and functions on main control panel are working great.
For model number PS978ST1SS
Hello Richard,
Thank you for your question. Yes, the control ui assembly under part PS5573482 for your model would be what would need to be replaced. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
February 4, 2020
It takes me several tries to get a burner to stay on, also both ovens. Seems once they reach the temp they will stay on. Can take up to 10 times
For model number PS978ST1SS
Hello Carol, Thank you for the question. Based on the information provided, this could be a defective Control Board, PartSelect Number PS5573482. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Angela
June 29, 2021
Code F760
For model number PS978ST1SS
Hello Angela, Thank you for the question. The F760 error codes indicate a Main Logic Board internal signal error and the Range User Interface Control Board will need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
LEVI
November 7, 2018
My range is constantly shutting down. I'm thinking it was something with a temperature sensor on the board somewhere. Any guidance?
For model number P S978S T1SS
Hello Levi, thank you for your question. That issues is usually caused by a faulty sensor or the board itself. We would recommend testing the sensor. There are two sensors, one for the upper and one for the lower oven. PS10059162 is the sensor for the lower oven. To test the sensor, use an ohm meter to check for resistance. The sensor should read between 1000 and 1100. If the sensor is working properly, and tests within those ranges the sensor is not faulty. The upper oven sensor is part number PS236398. The testing is the same for this sensor s well. If the readings are significantly different the sensor would have to be replaced. If not, the electronic board is the issue. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Toni
December 28, 2023
My top oven remains at 159 degrees doesnt shut off
The oven is hot
the lights remain open they do not shut off
Sometimes I cant set the oven the temperature that I want
I press 3 and I get 2
Both ovens do not heat to the temperature i press - i get 50 degrees less
For model number P - S978ST1SS
Hello Toni, thank you for the question. Based on the information provided, this could be a defective user interface control board, part number PS5573482. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Claudia
June 19, 2019
The range shut down. I replaced the control panel, but it is still not working.
For model number PS978STISS
Hi Claudia,
Thank you for your question. If the range is not working and you have already replaced the oven control board, the issue could be the oven sensor and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. Here is a link to one of our videos on YouTube that you may reference on how to use a multimeter, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Nayda
June 26, 2023
The cooktop keeps turning if on it own about every 20 seconds. Do I need to replace the board?
For model number PS978ST1SS
Hello Nayda, thank you for reaching out. Based on the information provided, this could be a defective control board, part number PS5573482. We hope this helps.
Was this helpful?
Thank you for voting!
Jack
October 12, 2023
The oven lights go on, but the glass display is completely black and the range no longer goes on. Would that be the entire control panel or just the control board. Before it went out, it was impossible to "lock" the range as that button no longer worked.
For model number PS978ST1SS
Hi Jack, thank you for the question. Based on the description you have provided, we would recommend checking the user interface control board, part number PS5573482. It sends electronic signals to the burners when you select the cooking time or temperature. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
Christine
November 23, 2023
Both the upper and lower over sometimes will not let me program anything with the #3 in it which is a problem since most recipes are 350* and sometimes the start won’t turn oven on. Is this the part I need? PS5573482? Thank you
For model number P S978ST1SS
Hello Christine, thank you for contacting us. According to our research, the issue is most probably with the control panel assembly. Before replacing the user interface control board, we would recommend replacing the control panel assembly, part number PS3654157, to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
