Lid Switch Assembly
$70.92
Special Order
PartSelect Number
PS5135698
Manufacturer Part Number
WH12X10531
Manufactured by
GE
Product Description
Lid Switch Assembly Specifications
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH12X10531 replaces these:
AP5646395, WH12X10275
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer was not agitating
First i the four screws on the switch area remover the front panel. Remover the lid swith and replace it. It was good to go again. It is as easy as one two three.
Other Parts Used:
-
Dwight from Orlando, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
38 of 81 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
October 26, 2017
Tub will not drain or spin. Lid switch has continuity. How can I tell if hose is clogged or lid switch is defective. Please advise.
For model number HTWP1000M0WW
Hi Ray, Thank you for the question. You can remove the hose and run water through to see if there is a blockage. You have already tested the switch for continuity. I suggest testing the timer. It might not be sending it to the next cycle to spin and drain. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
November 8, 2019
Can I test the lid switch to see if it is the problem before replacing it?
For model number WHDSR315D5WW
Hello Patrick, Thank you for the question. You can test the continuity of the switch with a Multi Meter. Here is a link on how to use a meter. Hope this helps!
https://www.youtube.com/watch?v=bWC44fHn0As
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
December 27, 2023
The washer operates and agitates correctly until it gets too the spin cycle , the water drains out completely but does not spin, I lift the lid a little and close it i can hear the switch clicking and the motor trying to rotate about 1/16 th of a turn but that’s all.
For model number WDSR2120J6WW
Hi Joseph, thank you for your question! Based on our understanding of the issue, we would suggest you replacing the lid switch assembly, part number PS5135698. Good luck with the repair!
Was this helpful?
Thank you for voting!
Vaughn
August 29, 2019
Does the WH12X10531 look identical to the WH12X10275 part it replaces?
For model number WH12X10531
Hi Vaughn,
Thank you for your question. Part number WH12X10531, replaces part number WH12X10275. It will work the same as the original. It may appear different. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Fernando
September 24, 2019
When the door open the machine drains and keeps going with the process, it does not spin but water is drained and refilled. Isn't supposed to completely stop when the door open?
For model number GCSR2090H9WW
Hello Fernando thank you for writing .
Yes it is usually coming to a stop once you open the lid. So you should check the lid switch for defect, you can do this with a multimeter. Part Number : PS5135698 is in the list of compatible items for your model. Hope this helps . Please contact us anytime.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS5135698
Manufacturer Part Number: WH12X10531
Manufacturer Part Number: WH12X10531
Brand
Model Number
Description