This vent grille mounts on the top of the microwave above the door.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB07X11385 replaces these:
AP5646325, 2314034, WB07X11385, WB07X11130
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Plastic in vent grill deteriorated in six years causing vent grill to fall of microwave.
Removed vent grill and replaced with new product from PartSelect. Three screws attach vent grill to microwave housing. Very easy to do, but not satisfied with original parts on vent grill uses by General Electric. Microwave is above range model and vents to the outside.
Other Parts Used:
RONALD from WESTLAKE VLG, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The microwave vent grill fell off. GE said this part was only going to last six years. What held it on were 3 plastic clips that just melted.
It was quite simple. Just a matter of fitting in the four groves and then screwing in four screws at the top of the vent.
Other Parts Used:
Yvonne from ORLAND PARK, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic clips hold the vent grille had broke off & therefore leaving this section unsecured.
Unscrewed the top 2 screws on top of grille , slid section to the left to release other metal clips . Place new vent grille , slid it to the right to catch the metal clips & then secured vent grille with the 2 screws at top of vent grille.
Other Parts Used:
WAYNE from TRUSSVILLE, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vent grill's plastic section had a defect
The part received was defective and I will have to use a rotary Dremel tool to grind down plastic that wasn't properly formed during the injection mold process. This will likely take several attempts to get it properly shaped in order to install the vent grill as it currently prevents the part from sliding left to right behind the slots in the microwave hood.
Other Parts Used:
Reed from Denver, NC
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken tabs on ventilation grille
Original vent tabs broke off. Had repaired it by attaching it back with screws and two pieces of plastic on the top, which eventually broke again. Bought this part, which fit perfectly. NOTE: part did not come with the screws. I used screws that I found on the old ventilation grille which were attached to two aluminum tabs on the inside. These screws fit perfectly for the top of the microwave attaching to the ventilation grille without a problem. Looks like new!
Other Parts Used:
Marco from UNIVERSITY HT, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry Brickner
March 25, 2018
The black plastic grille which holds the vent on our over the range GE microwave broke. I noted on your site the part # ps4704150 is list3ed as a vent grille stainless steel located in the diagram as section 109. Does this part listed above include all parts in section 109 including the black plastic grille? Thank you
For model number pvm 1870SM 3SS
Hello Jerry, thank you for your question! Yes, the item# 109 ( Vent Grille - Stainless Steel WB07X11385) for your model number PVM1870SM3SS includes all the pats for the vent grille in stainless steel, including the black plastic grille with the tabs on it that hold it to the unit. Please enter the part number into the site for current price and availability. Good luck with your repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara
September 16, 2019
Does this part have the black plastic piece that goes on the back of the stainless piece?
For model number PNM1871SM3SS
Thank you Barbara for writing .
Yes it does. Hope this helps. Please contact us anytime.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Elden
November 14, 2017
Is part wb07x11385 simple to install?
For model number PVM1870SM3SS
Hi Elden,
Thank you for your question. There is a video on our website that will provide you with general information that you can reference on how to install the vent grille. You will find the video under part number PS2361122. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
December 22, 2019
Is this the active vent? The vent opens when on and shuts when off?
For model number PNM1871SMSS
Hi Ray, thank you for your question. This part is your vent grille. It is the cover that is directly above your door. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
April 11, 2019
For p/n ps4704150 vent grille i only need the black plastic grille that holds the stainless steel grill on. Is that part available alone and if so, cost and availability. Third time i've fixed this in ten years
For model number PVM1870SM3SS
Hi Dave,
Thank you for your question. The part you are looking for is not sold separately. It is sold with the vent grille. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
September 9, 2019
Can I purchase only the plastic grill from the grill assembly (only part 108 vs 109 in the schematic)?
For model number PVM1870SMSS
Hi Jim,
Thank you for your question. If you like, you may purchase the stainless steel grille cover on its own. The part number for it is PS2321263. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Larry
January 25, 2018
The whole part assembly is loose, like the mounting screws need to be tightened. I cannot find the mounting screws, do i need to remove the microwave from cabinets?
For model number PVM1870SM3SS
Hello Larry, Thank you for your inquiry. Since the screws have to be accessed from the top of the microwave, most likely you will have to pull the microwave out from the cabinet. Although we do not have an installation video for this exact part number, I have included a link to video for a similar part to assist you. Hope this helps!
https://www.youtube.com/watch?v=RmWUByvchQ4&t=38s
Was this helpful?
Thank you for voting!
Deann
November 28, 2023
I need just the black plastic grille behind the stainless steel grille cover. Can I order just the black plastic grille part?
For model number PVM1870SM3SS
Hello DeAnn, Thank you for the question. The Black Bracket/Frame is only sold as part of the Vent Grille. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
