Metal Cooktop

Remove burners, liners and screws in modular plug's (Terminal Block's). Remove two screws under front lip,(open oven door, to gain access)raise top of stove to access screws at the rear hinge's (its easier to remove screws on the pivot and the support). Remove the grounding screw at center rear of top. Lift top off. Replace in reverse order. As a matter of information,the smallest tip will be needed. To replace the terminal block, use a small pair of needel nose pliers to squeeze the electric wire ends from inside the terminal block, plug the wires into new treminal block, no need to worry about which wire goes in which side.