![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Refrigerator Door Shelf Retainer Bar - Cut to Fit Specifications
This retainer bar is cut to fit your refrigerator and existing end caps.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Refrigerator Door Shelf Retainer Bar - Cut to Fit
![Replacing your Frigidaire Refrigerator Refrigerator Door Shelf Retainer Bar - Cut to Fit Replacing your Frigidaire Refrigerator Refrigerator Door Shelf Retainer Bar - Cut to Fit](https://img.youtube.com/vi/j_j0eM58rc0/maxresdefault.jpg)
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 240331401 replaces these:
AP2115820, 891017, 240331401, 240331402, 240331403, 240331404, 240331405, 240331408, 240331410, 240331415, 240331416
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jay G - March 28, 2024
Verified Purchase
Exactly what I needed
Perfect condition and the part arrived quickly.
Joann S - January 17, 2019
Verified Purchase
Broke during installation
The part came quickly. The metal bar was too long and had to be cut carefully before it could be used. It also had to have the little holes for installing put back into the metal.When carefully installing the right hand holder's plastic tip for locking the shelf in place broke off.The shelf is taped waiting for a new right side mount. The video was useful and helpful but even with great care the plastic right side tab broke off. The pictures on the website are very helpful in selecting the right parts.
James R - September 20, 2018
Verified Purchase
Easy repair, great part. Reliable service.
I was happy with the quality and service.
KAREN W - July 21, 2018
Verified Purchase
Perfect fit
This part came quickly and was exactly what we needed.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 36 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
tenants had broken door brackets in fridge
cut brackets to size and snapped them into place with the caps purchased. I will continue to use PartSelect for all my appliance repair needs. Not only did I receive my order within 2 days but the cost was over half of what I have been paying for the local parts store to order for me. Thank you PartsSelect.
Other Parts Used:
-
Nancy from Pleasant Prairie, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
932 of 937 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Retainer bar had broken from overloading the door with water bottles.
It took longer to remove the retainer bar from the packaging than it did to install it in the fridge.
Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.
Super easy!
Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.
Super easy!
Other Parts Used:
-
Nancy L from Gainesville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
732 of 740 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf-retainer bar and brackets
Put them together and (do this carefully, as they are light-duty plastic; the reason the originals failed) snapped them into place. Parts were factory-origninal, easy to figure out. Delivery time was exceptional, packaging great.
Other Parts Used:
-
Paul from Oakdale, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
464 of 465 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelving in Frigidaire Gallery side by side refrigerator and broken shelving in White Westinghouse/Frigidaire refrigerator
I snapped off the old, broken parts of the shelves and in the side by side fridge, I just popped on the new shelf. In the White Westinghouse freezer on top fridge, I had to remove (it snapped right off) the broken side shelf retainer bar end cap from the fridge and remove the broken piece piece of plastic from existing shelf retainer bar end cap that was stuck in the retainer bar. I used a letter opener to help get it out. Then I snapped the new door shelf retainer bar end cap into the bar, and snapped the bar end cap back to the door. Both repairs took less than 5 minutes..........and I am a female who isn't very handy!!
Other Parts Used:
-
Lori from Lawrenceville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
132 of 244 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf
snap in place
Other Parts Used:
-
DESMOND from BROOKLYN, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
43 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker water would constantly drip. Forming a huge block of Ice.
Pulled refrig away from wall, shut off water supply. Removed two screws holding the old water value on the back of the refrig. Removed the two water lines from the value. Hooked water lines up to the new value and bolted the two screws and the new value on. Turned on water and pushed refrig back into position. Simple and it worked. No more huge blocks of ice. I have Cubes!!!
Other Parts Used:
-
Jerald from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench (Adjustable)
36 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken or missing retainer bars I butter dish
Took the old ones off and installed the new ones. Simple repair
Other Parts Used:
-
David from Crystal River, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
16 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelf holders were broken along with end caps
The repairs were easy. The braces and end caps went together fairly easy. The freezer brace needed to be cut to fit but was easily done. 15-30 minutes was all that was needed.
Other Parts Used:
-
Jim from Kearney, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
16 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door missing parts
I ordered two of the long refrigerator shelf door bars and cut one of them to fit the freezer shelf door because that ready-made door bar was very expensive. The fit after cutting and notching to receive the end caps went very well.
Other Parts Used:
-
Catherine from Bismarck, ND
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Came With House - Had missing parts
The refrigerator that came with the purchase of my house had a missing retainer bar in bottom shelf of fridge and a duct-taped retainer bar in freezer. When parts came, all I had to do after removing the duct-tape, was slide up the broken end cap to pop it off then, snap the retainer bars into the end caps and slide them down into place. No tools necessary. Should have done this two years ago when I bought the house!
Other Parts Used:
-
Leslie from Lawrence, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
January 4, 2019
Will this fit refrigerator and freezer?
For model number FRT18TPH
Hello Deborah, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS422630. The Part Number: PS422630 fits both the freezer and fridge door. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Connie
June 18, 2019
Does the refrigerator door bar part # ps429820 fit the end caps part #s ps429667 and ps429668. I am looking to replace 2 shelf bars/end caps in our Electrolux refrigerator model # frt17b3aw2 thanks
For model number FRT17B3AW2
Hello Connie, thank you for writing. There are different End Caps depending on what location the Bar is going on. Is the Bar you are replacing going on the freezer or fresh food door? If it is the fresh food door, is it the middle one or either the top or bottom? The middle fresh food door Bar uses part PS429833 and PS429834. The rest of the Bars on the refrigerator use parts PS429668 and PS429667. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ping
May 23, 2023
You only show a "cut to fit" retainer bar for the shelves for the FRT18B4A frig. The video shows that there are notches on the end to clip on the end pieces. How does this work on a "cut to fit " part as the end may get shortened too much to fit properly on the end piece or maybe even cut off completely? The "pic" for this part also shows only one set of notches.
For model number FRT18B4A
Hi Ping, thank you for contacting us. The end pieces are used to attach the retainer bar, part number PS429820, to the inside of the door. The end caps are removable and are also available to be sold separately. These end caps fit the cut-to-fit retainer bar. The end cap slides in the retainer bar. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
January 21, 2024
Can you please confirm the correct part to order to replace the bars holding in fresh food in the refrigerator door for the middle and bottom door shelves?
Thank you.
For model number FRT21G4BW3
Hi Pam, thank you for reaching out. The door shelf support for the right side of the bottom shelf retainer bar is part number PS429668, and for the left side is part number PS429667. The door shelf support for the right side of the middle shelf retainer bar is part number PS429834, and for the left side is part number PS429833. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
BEN
February 28, 2019
The refrigerator door shelf retainer bar is a different length then the one in the freezer they a not both the same length. I read in the q&a that you guys were telling people that they are the same and they simply are not. So i was wondering if you have the freezer one.
For model number 25371822104
Hello Ben, Thank you for contacting us. I believe this is in regards to one of the cut to fit bars. Based on the diagram I show the freezer bar as figure 8 which is part number PS429820. Pleas note the end caps are sold separately. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Molly
June 12, 2019
What is the length of this bar in inches?
For model number 1069730681
Hello Molly, Thank you for the question. This Refrigerator Door Shelf Retainer Bar is 20.25" and must be cut to fit your refrigerator. Hope this helps!
Was this helpful?
Thank you for voting!
Cecilia
January 15, 2018
Does this part works for the freezer door?
For model number FRT18KC3BW2
Hello Cecilia, Thank you for your inquiry. Yes, this part is for the freezer door as well. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS429820
Manufacturer Part Number: 240331401
Manufacturer Part Number: 240331401
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)