Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Laura D - March 3, 2023
Verified Purchase
EasyRepair
The part came in fast and fit like a dream. Very easy and smooth process
★★★★★
★★★★★
Paulette P - January 29, 2022
Verified Purchase
Broke knob
Ordered it and received it on time and I’ll tell ya what???? It worked!!
★★★★★
★★★★★
Renee L - November 23, 2021
Verified Purchase
Good quality part.
Part was exactly as indicated and good quality.
★★★★★
★★★★★
Audrey M - August 21, 2019
Verified Purchase
Did the trick - as advertised
As in some mentions, the knob is a bit larger in diameter than the original but not that it makes any difference. Works like a charm!
★★★★★
★★★★★
Marc S - June 14, 2019
Verified Purchase
Perfect replacement for a broken knob.
The part came quickly fit perfectly.
★★★★★
★★★★★
Stephen B - April 23, 2019
Verified Purchase
Easy repair got here fast every thing was great
Dryer is working like new with the part
★★★★★
★★★★★
Mark P - April 8, 2019
Verified Purchase
Best Knob Ever!
As far as dryer knobs go, this is the best. Look no further for a dryer knobs if you are ever in need. This one wins hands down.
★★★★★
★★★★★
Michael B - February 23, 2019
Verified Purchase
On time
The knob worked perfectly, it was a perfect replacement
★★★★★
★★★★★
Laura S - December 5, 2018
Verified Purchase
Easy to install, does the trick
The dryer is 8-9 years old, and this is the 3rd time I've replaced the timer knob in as many years. The original part number appears to have been discontinued. This one looks very similar, just has a wider rim around the knob. It's not a perfect fit with my dryer, but it does the trick. Either way, these plastic parts are made cheap. The original part lasted 6 years and now the interior on the replacements crack annually. Perhaps actual dryer just needs some WD-40? The knob always seems to get stuck in one spot, so it cracks from having to repeatedly crank it firmly past that trouble spot.
★★★★★
★★★★★
Kevin H - October 29, 2018
Verified Purchase
was perfect match for my dryer
was perfect match for my dryer
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 39 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original timer knob broke
I looked in my appliance paperwork, found the model number, keyed it in, located and ordered the knob. It arrived in a few days and voila, pushed new knob on and dryer is back in great working order. Thanks!
Other Parts Used:
Cheri from Cary, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
470 of 473 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer did not work and the knob was broken too
The job was very easy, I just unscrewed the back of the unit (6 screws) and the two screws securing the timer in the front. I then disconnected the timer. All I had to do was reverse the process and I was done. It took less than 15 minutes.
Dryer was missing the grounding ball and making a loud squeal
First I located the two clips holding the top of the machine on and opened the top of the dryer. I then disconnected the two wires on the door switch and removed the two screws holding the front panel on. After removing the front panel, I vacuumed all the loose lint and as far into the lint trap as possible. I then removed the back vent panel and released the drum belt from the pulley. I pulled the drum out of the support bearing. Then I removed two screws holding the drum support bearing, bracket, and grounding ball clip. I replaced the grounding ball and drum support bearing with new parts, (as the drum support bearing was damaged without the grounding ball). Then I reversed the order and put the dryer back together. Overall I felt the job was easy and I'm happy to be able to use a quiet machine again!!!
I unplugged the dryer from the wall and removed the back panel to replace the switch. It only had two wires on the switch I pulled then off and placed them on the new switch and put the unit back together and replaced all the knobs with new ones and it looks new again. Thanks to Parts Select.
Remove the two scews that held it in place. Pulled the element out far enough to replace it. I left the old part on so as not to get confused by which wire went where, and just replaced the part. Very easy.
When the part was delivered I opened the box and unwrapped the knob from the protective paper. I walked down the whole length of my hallway to the laundry room and carefully approached the dryer. Stealthily I reached across the top of the dryer and slid the knob onto the metal rod. Voila! I am now a certified Frigidaire Clothesdryer Repairperson!!
Other Parts Used:
Joyce from Locust Grove, VA
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene
September 28, 2017
I am looking for a knob on my model #fer231as1... it is item #21 in your control panel diagram. I see the pic on your website of the knob, which is what I need but can you tell me if this part comes with the little metal insert thing on the back side of the knob that connects to the dryer??
For model number FER231AS1
Hi Darlene, Thank you for the great question, Yes this knob comes with the small D shaped clip that fits into the hole on the back of the knob. Good luck with the repair !
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
May 5, 2018
Is this part number a two part knob assembly?
For model number FWS645GFS1
Hi Tony,
Thank you for your question. It is not. This part comes like it is pictured above there. If you also need your dial I have listed that part down below for you. I hope that helps. Good luck with your repair.
The timer for this Frigidaire washer model stops working when it reaches the spin cycle. I see the timer is kind of a sealed unit. Can it be repaired or do i need to replace it?
For model number FWS645GFS1
Hi Tony,
Thank you for your question. You would need to replace it. However you may also want to check your lid switch to make sure that it is still working. If your lid switch is not working then when your appliance gets to your spin cycle, it will stop because it thinks that the lid is opened and that is a safety hazard. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
