Product Description
Door Handle Specifications
Screws NOT included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, Kenmore, Estate, Roper.
Part# 4393777 replaces these:
AP3033588, 588286, 4393777, 4393733, 4393777
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
David H - September 1, 2018
Verified Purchase
Replace door handle on Microwave
Part was the correct one - unfortunately it did not come with the two screws required to secure it to the microwave cover panel (which I also ordered.) I was able to salvage old screws for the damaged parts but to be honest one would think the screws to secure the new door handle would have been included with the door.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The door cracked and the door handle fell off.
I removed the screws to the old handle and screwed on the new one
Other Parts Used:
-
Kerry from Edwards, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
32 of 101 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the door handle was broken and the casing for the door was broken.
The part arrived with a couple of the small clips that hold the glass in place broken and a poor glue job. After I re glued the glass the installation was easy.
Other Parts Used:
-
Chris from Keller, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
22 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Juliette
August 31, 2017
The replacement door handle does not include screws. What kind of screws are needed?
For model number MH1150XMQ2
Hi Juliette,
Thank you for your inquiry. We sell the screws you need to install the door handle. The part number for the screws is PS373771 and they are sold individually. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Henry
October 20, 2017
I have a Whirlpool microwave m# gh4155xpb3 and it is black. Is this a black handle?
Hi Henry,
Thank you for your inquiry. The handle you have referenced in your question to us is white. The part number for the black handle is PS373727. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 8, 2019
How do i take the door apart to install a new handle?
For model number wmh1163xvs-2
Hi Robert, thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. The door latch is held in place by tension. There is a spring that is usually attached to the latch and to one of the fins on the door to provide it. With the inner lining removed you can now remove the old latch. Install the new latch by slipping it into the slots in the door and attach the spring to the bottom fin to allow for tension in the latch. Reinstall the lining and close the door. Plug the microwave back in. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jonathan
September 15, 2022
The handle screw is broken and pulled out of the handle.. what parts are required
For model number GH4155xpS-3
Hello Jonathan, thank you for your question. The screw is sold separately as part PS11728054. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Related Parts:
Eric
September 30, 2023
Do you have the door handle available in Black? I see in white on the website but my microwave is the black version.
For model number YMH6140XFB2
Hi Eric, thank you for contacting us. The black door handle compatible with your model is part number PS373727. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
Doug
January 2, 2019
The outer door frame, 8169471, was cracked. I received the new part to replace but no instructions. Can you help me?
For model number GH7145XFQ1
Hi Doug, thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. The door latch is held in place by tension. There is a spring that is usually attached to the latch and to one of the fins on the door to provide it. With the inner lining removed you can now remove the old latch. Install the new latch by slipping it into the slots in the door and attach the spring to the bottom fin to allow for tension in the latch. Reinstall the lining and close the door. Plug the microwave back in. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS373722
Manufacturer Part Number: 4393777
Manufacturer Part Number: 4393777
Brand
Model Number
Description