Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
May 1, 2018
Dishwasher will not stop,will this part fix that problem
For model number MDB7749SAQ0
Hi Don, Thank you for the question. If the appliance is stuck in one cycle and will not proceed to the next cycle, I suggest replacing the control board. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joel
May 1, 2023
Dishwasher was working then when reloaded will not start. No lights come on the panel, nothing. It has power.
For model number MDB8949SAW1
Hi Joel, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the electronic control board, part number PS3633161, to fix this issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carol
March 3, 2023
AT FIRST THE LIGHTS STARTING FLASHIN RANDOMLY. NOW THE START BUTTON FLASHED CONSTANCTLY AND NONE OF THE OTHER BUTTONS WORK. DO I JUST NEED TO REPLACE THE CONTROL PANEL OR MORE? ALSO, WHEN i OPEN THE DW, THE BIG LOWER PANEL CAM E LOOSE FROM THE CONTROL PANEL. I PUSHED IT BACK INTO PLACE FOR A WHILE THEN JUST WAS VERY CAREFUL TO SLOWLY OPEN THE DW.
For model number MDBH979SAW1
Hi Carol, thank you for contacting us. To fix this issue, we would recommend checking the wire harness, part number PS11754261, and the electric control board, part number PS3633161. Furthermore, there are two bolts at the back of the big panel, and we would suggest tightening them to fix the loosening issue. We hope this solves your problem!
I sent a question about repairing my dishwasher which WILL NOT RUN . . . IT WILL NOT START . .
Instead, you ignored the first half of the questions and gave suggestions for the flashing lights.
Thanks for nothing Maytag. You suggest I spend $300 for flashing lights but still have a disher that DOES NOT WORK.
For model number MDBH979SAW1
Hello Carol, thank you for contacting us. We would recommend checking the following parts to fix the issue: door latch, part number PS8770043, circulation pump, part number PS11757388, and touchpad and control panel, part number PS11723017. We have attached a relevant link to help you check these parts. We hope this sorts out your problem!
Hello, i have a Maytag model # mdb4709pam1 dishwasher that’s not drying dishes. In addition the rinse/drying aid liquid is not emptying. The heating element is working. Do you think the control board needs to be replaced?
For model number Maytage Model MDB4709PAM1
Hello Mikie, thank you for inquiring. Besides the Heating Element part PS8260087 for not drying the dishes, you will want to consider the High Limit Thermostat part PS11743423. For the Dispenser issue, you will want to consider replacing the Dispenser itself part PS11754648. We hope this helps.
Was this helpful?
Thank you for voting!
Chris
October 10, 2022
I have a Maytag that works when I press start but I can’t select any options on the control panel. Most lights are solid. Would this be the control panel or control board?
For model number MDBH979SAM0
Hi Chris, thank you for reaching out. According to our research on the model, the Electronic Control Board appears to be faulty and you may need to replace it with part number PS3633161. Before replacing the board please also check the harness of the control panel. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
