Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
January 12, 2018
Dryer runs continuously unless door is open. I have cleaned the sensor bars thoroughly and replaced the thermistor and blower thermostat. Still have problem. Dryer is all electronic so there is not a separate timer. Thinking pcl is bad. Please help
For model number 79669272000
Hello Tim, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: door catch, heating element, and check the connections on the control board.You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
Phil
April 9, 2018
We had a power surge that blew out the washer and dryer. Would the control board replacement bring it back to life ? Both appliances...
For model number Kenmore Elite 7927200
Hi Phil,
Thank you for your question. Those parts are likely to be the ones that have malfunctioned in your appliance because of the surge. However the only way to know for sure would be to have a technician come in and test the parts. Unfortunately with a surge it could have effected any of the electrical parts inside of your machine. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
