Part Location Diagram of 4318046 Whirlpool Dual Outlet Valve Kit
See part 10 in the diagram
Replacing your Kenmore Refrigerator Dual Outlet Valve Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dual Outlet Valve Kit

★★★★★
★★★★★
3 Reviews
$106.21
  In Stock
PartSelect Number PS358630
Manufacturer Part Number 4318046
Manufactured by Whirlpool
Product Description

Dual Outlet Valve Kit Specifications

This part comes with several mounting brackets and plastic unions.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Refrigerator Dual Outlet Valve Kit

Replacing your Kenmore Refrigerator Dual Outlet Valve Kit
Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# 4318046 replaces these:
AP3103466, 3307, 4318046, 1022, 2002182, 2199838, 4210533, 4318046VP, 46004210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238 ... Show more , 628275, 628295, 819493, 8216, 850733, 876070, 99989713, IH2002 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 20 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Outlet valve housing was cracked and leaking water
Removed panel in back of fridge. Disconnected water line. Removed outlet valve housing and disconnected wiring. New part is a retro-fit and was modifiable to fit into same space as old part. Reconnected wiring and water line. Turned water back on to test. Checked water dispenser in front door panel. All good. Replaced panel and wheeled back into place.
Other Parts Used:
  • Thomas from North Attleboro, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
65 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Just a trickle of water to icemaker and water dispenser
Turned refrig off, pulled it out for access to the valve, unplugged refrig and turned off water supply to the outlet valve. I made the installation a bit more difficult by over tightening the supply line connection which ruined the brass compression washer. I replaced it with a plastic compression washer which is probably better since the supply line is plastic. The electrical connections were very simple. I was just guessing the old outlet valve was bad since I had checked the filter. After replacing the valve, the ice maker and water dispenser work like new on a 17 year old refrigeration. Also, I was very pleased with fast processing and delivery of the order.
Other Parts Used:
  • Bill from Hot Springs Village, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Wrench set
22 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker water outlet freezes and prevents flow
Get refrigerator out away from the wall. Disconnect from power. Loosen 3 and remove 3 or 4 screws to uncover fan, compressor and water inlet valve (WIV). By hand remove plastic hoses that feed the water dispenser and ice maker feed. Unscrew 2 screws that hold WIV her you need the Spring U Joint (SUJ) or equivalent. Pull wires and make mental note or picture the way they fit. They retain the memory the way they came out. With adjustable or wrench remove tube that comes from the filter. Remover black rubber protector from WIV. Install the last hose you removed. Tighten by hand and finish with the wrench used to remove it. Don't over tighten. Maybe 3/4 turn or less after hand tight will do. The difficult part is to re-install the screws that hold the WIV in place, again you need the SUJ. The alternative would be to empty the shelves from anything that will spill or break and have someone tilt the refrigerator and access from below. I used the 1st method as I didn't have the extra help. Install the water dispenser hose (by hand), blow compressed air to the ice dispenser hose to clear the ice. There is another plastic hose just above and behind the dispenser which must be removed to clear the ice that is being blown. After the ice is clear re-install the one in the freezer. That one is just pressure held be careful not to break when replacing it. Re-install by hand the ice dispenser hose to the WIV. Replace the cardboard cover that was 1st removed to access the components. Power the refrigerator and you are ready to make fresh ice. My ice maker lever was stuck at 1st. I released pressure from the metal wire lever and wiggled up and down several times to loosen up.
Other Parts Used:
  • Alexander from Miami, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable), Wrench set
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Water out dispenser & ice maker did not work
Pulled close out panel exposing valve kit. Removed water lines, removed retaining screw, removed both electrical connections. Installed electrical connections on new valve, installed assembly, connected water lines. Replaced ice maker by removing three screws, unplugged connection. Installed connector on new unit , installed screws and plugged in unit. Everything worked just fine.
Other Parts Used:
Replacement Ice Maker
  • Kenneth from Davenport, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dripping from door dispenser
The part received was a straight replacement part - no modification required, just a simple remove and replace. This made the job really easy. Used the socket set to lower the front wheels to move the refrigerator, the nutdriver to remove the back cover and the valve, and the adjustable wrench to remove the water line. I had to cut the supply line tubing because the ferrule was too far up the line to make a good seal (minor leak quickly corrected with parts available in the kit - nice touch!) What took the most time was cleaning the coils and lint, etc. - hey I hadn't moved the unit in years! - but I did not include the 45-60 minutes this took in the repair time. Directions supplied were clear and easy to follow - but in my case I could have done the job without them - easy to see what needed to be done, but the stated precautions were nice.
Other Parts Used:
  • Charles from Sacramento, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water to icemaker
The replacement valve was identical to the old one, so I didn't have to use any of the adapter parts sent with the new valve. This made the installation rather simple. After removing the back cover on the lower part of the refrigerator, I turned off the water and electrical supplies, and removed the water supply line to the valve. Then I removed the two screws securing the valve to the refrigerator. Next, I removed the two electrical connections from the valve, and unscrewed the plastic nuts holding the tubing to the valve. I didn't have to use a wrench to do this as they were hand tight, so when I attached the tubing to the new valve I tightened the nuts hand tight. This seemed to be sufficient and avoided the possibility of stripping the nuts. After checking for leaks, I attached the electrical connections and secured the new valve to the refrigerator. Then I attached the water supply line, but before replacing the back cover, I turned on the refrigerator, and let it cycle through it's first load of ice.
Other Parts Used:
  • Walter from Willis, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our ice maker did not work.
I turned off the water supply and disconnected the power. Then I removed the back cover plate and the two water lines. Fortunately the water lines are a different size so it is not confusing which line goes on each outlet. Then I loosened the two screws that fasten the valve assembly. It requires a nut driver with a flexible drive or a 1/4" socket set with a "U" joint. We were then able to disconnect the third water line on the back side of the valve assembly. I then reversed the sequence to install the new valve. The only difficulty is getting the screws started on the valve assembly.
The trouble shooting guide in the Kitchen-aid user manual is totally inadequate. I bought and replaced the whole icemaker unit when all I needed was the valve.
Other Parts Used:
  • Jay from Flower Mound, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker leaking or overflowing into ice bend
first bought new ice maker installed it-didn`t fix the problem. next bought fill tube kit and dual outlet vale -installed those ice maker works GREAT no leaks -no ice froze together in bend. thanks for the help GUYS.
Other Parts Used:
Ice Maker Water Fill Tube Kit
  • LARRY from DYER, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker not working
Started the replacement of the existing dual outlet valve by removing cardboard covering the lower back of the refrigerator exposing the outlet valve. Closed the water supply valve at the wall. Removed the hose bibb water supply connection on the outlet valve by hand as it is only hand-tight. I used a small plastic container to catch the minimal amount of water left in the copper line. I removed the electrical connection on each solenoid valve (one for the in-door water supply and one for the icemaker supply). I removed the plastic supply lines from the outlet valve. I removed the screws on the bracket attaching the dual outlet valve to the refrigerator vertical rail. I reconnected the electrical connectors to the valve. I reattached the plastic supply lines to the valve, but did not tighten them fully at this point. I secured the bracket on the new valve to the existing screwholes on the refrigerator rail. The new outlet valve does not have a hose bibb connector, it has a compression fitting for the supply. I reused the existing copper supply line from the wall angle-stop valve to reconnect to the new outlet valve. (It would have been best to have cut the copper line and used a new furrel on the copper line). Note that the supply line now comes into the outlet valve from the top, not the rear as on the old valve, so now the dual outlet valve sticks out beyond the frame of the refrigerator. I tightened the nuts on the plastic supply lines on the valve. I had to cut the cardboard cover around the new outlet valve. Resecured the cardboard cover to the back of the frig. Checked for leaks, turned the icemaker on by lowering the shutoff arm, and after a few moments, the outlet valve opened, water flowed into the icemaker, and all is well.
Other Parts Used:
  • Hal from Virginia Beach, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would not work.
I replaced the dual outlet valve and deiced the filler tube going to the ice maker. I removed the filler tube and ran hot water on it. I believe the old filler valve was leaking letting water slowly into the filler tube where it eventually froze solid.
Other Parts Used:
  • Ed from Glendora, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
November 29, 2017
When replacing a water valve, my old one has threaded lines, and the new replacement part has quick disconnect fittings. How can I make this work?
PartSelect logo
Hello Don, Thanks for your question. You will need to shut off the water supply, then cut off the retaining nuts from the existing water lines. Afterwards, gently push the water lines into the new valve. Depress the rings the tubes slide into to remove the water lines. I hope this helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Mark Ellis
April 7, 2018
Our ice maker was not working. The ice water spigot is working. I replaced the dual outlet valve kit (part select number ps358630). Again, the ice water spigot is working, but the ice maker is not drawing water from the dual outlet valve kit. The line appears to be open. It is not frozen and i can blow through it. Why didn't this replacement solve my problem? Any ideas?
For model number KSRS25QAWH10
PartSelect logo
Hello Mark, Thank you for your inquiry. Make sure that the water inlet valve is getting sufficient water pressure-should be 20 psi. You can also test the water inlet valve with a multimeter to make sure you did not receive a defective one. If the water valve tests ok, and the line is not clogged, test the ice maker and the ice module. We have included a link on how to test the ice maker and the ice module. Scroll down to the section on ice maker assembly, and it will advise on how to test both parts. Hope this helps! https://www.partselect.com/Repair/Refrigerator/Not-Making-Ice/

4 people found this helpful.

Was this helpful?
Thank you for voting!
Fred
November 22, 2017
Does this model have an anti drip valve?
For model number ED5VHGXML12
PartSelect logo
Hi Ferd, The appliance came with the Anti Drip Valve but it is no longer made and the Water Dispenser Fitting and Tube Assembly,PartSelect Number PS886371 has been redesigned so it is longer needed.Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
January 30, 2020
I just received my dual outlet valve kit part # ps358630, i'm not familiar with the water connection to the valve, instead of a plastic compression fitting that screws on, it appears to be some kind of fitting that you just push the tubing into the connector. Can you give me some instructions on this? It appears you just push the two different sizes of tubing into the slots?
For model number 1069545711
PartSelect logo
Hi Mike. Please watch our installation video here: https://www.youtube.com/watch?v=v2msSGA3Ls0&feature=emb_title. Thank you for your question and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS358630
Manufacturer Part Number: 4318046
Brand
Model Number
Description
Kenmore
10644102300
Refrigerator
Kenmore
10644103300
Refrigerator
Kenmore
10644109300
Refrigerator
Kenmore
10654902300
Refrigerator
Kenmore
10654903300
Refrigerator
Kenmore
10654909300
Refrigerator
Kenmore
10658289990
Refrigerator - Kenmore Refrigerator Model 106.58289990 (10658289990, 106 58289990) Parts
Kenmore
1065858782
Refrigerator - Kenmore Refrigerator Model 106.5858782 (1065858782, 106 5858782) Parts
Kenmore
10659782290
Refrigerator - Kenmore Refrigerator Model 106.59782290 (10659782290, 106 59782290) Parts
Kenmore
1067629419
Refrigerator
Kenmore
1067629429
Refrigerator
Kenmore
1067629449
Refrigerator
Kenmore
1067629469
Refrigerator
Kenmore
1067640610
Refrigerator
Kenmore
1067640611
Refrigerator
Kenmore
1067640620
Refrigerator
Kenmore
1067640621
Refrigerator
Kenmore
1067640640
Refrigerator
Kenmore
1067640641
Refrigerator
Kenmore
1067640660
Refrigerator
Kenmore
1067640661
Refrigerator
Kenmore
1067650510
Refrigerator
Kenmore
1067650511
Refrigerator
Kenmore
1067650512
Refrigerator
Kenmore
1067650513
Refrigerator
Kenmore
1067650520
Refrigerator
Kenmore
1067650521
Refrigerator
Kenmore
1067650522
Refrigerator
Kenmore
1067650523
Refrigerator
Kenmore
1067650540
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service