Replacement Ice Maker 4317943

Official part for Kenmore, Whirlpool, KitchenAid, Maytag

★★★★★
★★★★★
(22)

Really Easy 

15 - 30 mins 

Install video
358591-1-M-Whirlpool-4317943 -Replacement Ice Maker
Part Location Diagram of 4317943 Whirlpool Replacement Ice Maker
See part 100 in the diagram
Replacing your Kenmore Refrigerator Replacement Ice Maker
( Grid squares measure 1x1 inch )
358591-1-S-Whirlpool-4317943 -Replacement Ice Maker 358591-2-S-Whirlpool-4317943 -Replacement Ice Maker 358591-3-S-Whirlpool-4317943 -Replacement Ice Maker Part Location Diagram of 4317943 Whirlpool Replacement Ice Maker Replacing your Kenmore Refrigerator Replacement Ice Maker
Proudly Canadian
OEM badge Official OEM Part
$190.47
In Stock
Order within the next 7 hrs and your part ships today!
 Fits your 1069450220!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Replacement Ice Maker Specifications

***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.
Part #4317943
Manufactured by Whirlpool for Kenmore, Whirlpool, KitchenAid, Maytag

You May Also Need

Because heroes deserve fewer surprise re-installs.

$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Kenmore Refrigerator Replacement Ice Maker

Replacing your Kenmore Refrigerator Replacement Ice Maker

Replacing your Kenmore Refrigerator Replacement Ice Maker

Replacing your Kenmore Refrigerator Replacement Ice Maker

About this fix

Common problems and models this part fixes.

Really Easy 

15 - 30 mins 

Rated by verified customers

What this part fixes:
  • Ice maker not making ice
  • Leaking
  • Ice maker won’t dispense ice
  • Ice maker dispenses too little ice
  • Ice maker dispenses too much ice
  • Won’t start
Works with the following products:
  • Refrigerator
  • Ice Maker
  • Wine and Beverage Cooler
Part# 4317943 replaces these:
AP2984633, 1857, 4317943, 4210317, 4211173, 4317943, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394 , 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626636, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 978556, 99989730, IC14B, M626687, W10122496, W10190952, W10281545, W10632400 Show less

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
22 Reviews
4.8

Out of 5

  • 5 Stars
    19
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Wes B - September 26, 2018
  Verified Purchase
DYI
Part fit - installation was as described took only a few minutes to install - works great
★★★★★
★★★★★
Daniel L - June 2, 2021
  Verified Purchase
Works great
Parts work great. Took some time to get them but everything was exactly what I needed.
★★★★★
★★★★★
Glenn R - April 14, 2021
  Verified Purchase
Easy repair. Worked as expected......
All is well. Thank you for speedy and exceptional service. I am am happy that I don’t have to pick icicles off the eves of my house for happy hour!! Cheers!!
★★★★★
★★★★★
Hector V - April 25, 2024
  Verified Purchase
Icemaker
Fast delivery and easy to install
★★★★★
★★★★★
Jeff K - August 7, 2018
  Verified Purchase
Great parts and speedy delivery.
The correct parts at a great price.
★★★★★
★★★★★
Steve L - February 26, 2021
  Verified Purchase
Ice maker
The part was a perfect match for my fridge. Easy to install
★★★★★
★★★★★
Mark L - August 19, 2021
  Verified Purchase
Right part for the repair and installed easily.
I have repaired several appliances with parts from Easy and have always been satisfied. Fast delivery. Never an issue with the part.
★★★★★
★★★★★
Jack P - August 21, 2019
  Verified Purchase
Replaced the icemaker myself and it went well.
The icemaker arrived in perfect condition and in a very short time. It is working well and ice making ice perfectly.Thank you.
★★★★★
★★★★★
Wayne D - October 21, 2022
  Verified Purchase
Worked like a charm
Easy install and saved me from buying a new fridge
★★★★★
★★★★★
Robert W - June 16, 2020
  Verified Purchase
Really simple to Install!
Quick delivery. No surprises. Good instructions. Easy to install. Works fantastic!
  • 1
  • 2
  • 3

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

15 - 30 mins 

Average repair rating from 215 real customers like you

Sort by:
  • 1
  • 2
  • 3

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
was not making ice
700 of 781 people found this instruction helpful.
  • GLENN from ORLAND PARK, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker.
Was this helpful?
Thank you for voting!
Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.
596 of 639 people found this instruction helpful.
  • Max from Green Castle, IN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
Read less
Was this helpful?
Thank you for voting!
No Ice in the Ice Maker
201 of 237 people found this instruction helpful.
  • Chris from Duluth, GA
  • Really Easy
  • Less than 15 mins
  • Socket set
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, since the new one didn't come with it. I then put the new one in place. All the parts fit perfectly. The ice machine was making ice within an hour. My family was amazed... and I got the last laugh!
Read less
Was this helpful?
Thank you for voting!
Original icemaker would only make 1 or 2 cycles in a 24 hour period
131 of 220 people found this instruction helpful.
  • Charles from Greenwood, SC
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The repair was extremely easy; after turning off the water valve on the back of the refrigerator, I removed the 3 screws (using a short length nut driver due to the confined space) and unplugged the harness. I did not need to splice the harness on the original ice maker and I simply plugged it into the new ice maker, screwed the unit back on and turned the water back on. It's great to have plenty of ice without having to use the ancient ice trays.

My wife had overloaded the original plastic Pan-Crispr basket with too much cheese which caused the flange to break. The replacement basket from Partselect was an exact match and simply slid in.

I'll definitely come back to Partselect for accessories and parts.
Read less
Was this helpful?
Thank you for voting!
icemaker leaking infreezer compartment
103 of 131 people found this instruction helpful.
  • John from Oberlin, LA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
first I backed off top two screws and removed bottom screw. unplugged wire harness. removed old icemaker. harness on new icemaker was the same. plugged in hung new icemaker on top two screws installed bottom screw. turned water on job complete and very easy. I was very satisfied with the whole process.
Was this helpful?
Thank you for voting!
Leaking tray created iceberg but few ice cubes!
54 of 83 people found this instruction helpful.
  • Brenda from Palm City, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
Received my kit quickly. Job was fast and easy. Removed 3 screws with nutdriver and unpluged the wiring harness. Use a flat blade screwdriver to lift the tab on the plastic end cap of the harness. The icemaker comes out in one piece. The wiring harness that came installed on the replacement icemaker matched mine perfectly. (It comes with two others). I plugged the new one in, replaced the screws, bottom one first to help hold it while replacing the top two screws. I used the shut-off arm from my faulty icemaker. Turned the power back on and put 1/2 cup of water in the tray and walked away. Ice dropping into the bin was music to my ears. Didn't need any of the clips or things that came with the icemaker. It was basically a "plug and play". I'm so happy to have ice again, and at a great savings!
Read less
Was this helpful?
Thank you for voting!
No ice, water to dispenser OK
44 of 50 people found this instruction helpful.
  • Mike from Myrtle Beach, SC
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
Originally replaced water inlet valve, not the problem. Tried to work from cheap to expensive.
1. Turn off power, shut off water supply
2. Loosen top two screws of ice maker (will slide up and off, no need to take top two out)
3.Remove bottom screw from ice maker
4.Pulled unit, snapped out existing wire harness
5.Cut hole for water inlet on end of new unit and attached wire icemaking on/off bracket.
6 Connected existing wiring harness to new unit
7. Slid new unit down onto top two screws, put in bottom screw and tightened all three
8. Turned on power and water supply
Had ice being made within two hours. Part Select has given me great service, highly recommend.
Read less
Was this helpful?
Thank you for voting!
Icemaker would not stop putting out water, then would not make ice
44 of 56 people found this instruction helpful.
  • Phil from Felton, DE
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First, I unplugged the power to the entire fridge, and then removed the ice tray and ice door. Next, I unplugged the flat plug in the very back left behind the icemaker. Then I removed the 1/4" hex head sheet metal screws (2) and the phillips head screw (1) that hold the icemaker to the left side of the freezer wall. New icemaker came with a different style trip arm, so I used it. Plugged new icemaker in before reattaching it with the same (3) screws. Replaced ice tray and door, plugged in fridge, and waited....Dumped its first batch of ice maybe a couple of hours later. Not much trouble-shooting is needed when the entire icemaker is as easy and relatively inexpensive to replace as this. Twenty minutes, max.
Read less
Was this helpful?
Thank you for voting!
Ice Maker Stopped Making Ice
43 of 51 people found this instruction helpful.
  • robert from kennesaw, GA
  • Really Easy
  • 15 - 30 mins
  • Socket set
I had a technician called out to the house to look at repairing several appliances that all have broken parts after just 3 yrs of use. Hood, Microwave, Oven, Fridge all in need of minor repairs..

Anyway - the estimate was $240 to replace the ice maker. I ordered PS358591 for $104. and it came in a couple days.. I took out one screw - slid out the icemaker, unplugged it - plugged in new one and slid it in the slot - and done !! Took about 20 mins.. didnt need any of the wiring harnesses in the box from partselect. Was way to easy to do !!

Thank you !
Read less
Was this helpful?
Thank you for voting!
Ice Maker stopped working due to defective timing gear
42 of 46 people found this instruction helpful.
  • Nicholas from Boca Raton, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
I removed two screws on the top and one underneath the unit. Then I disconnected the cable. The hardest part was getting the nut driver on the bottom screw because it was obscured by the unit. The replacement unit plugged right in! I got my first batch of ice in about 20 minutes. All I really needed was the timer unit, but the entire ice maker wasn't much more expensive, especially when you consider the time saved on installation!
Read less
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

DIY Questions and Expert Answers

107 questions answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan - For model number ed2chqxkq05
September 23, 2017
Ice maker is not making ice. It does not appear water is going into the tray area, yet water is coming into the refr. As you can still use the water glass fill, at the door. I could always order a new ice maker, but hate to do same, removing and installing a new one and finding the problem is elsewhere. Help!
Chris Boyle Profile
Hello Alan, thank you for contacting us. That sounds like it would be the icemaker control assembly. This part controls all the ice maker functions as well as the solenoid which controls the water flow to the ice maker. When this fails you will still get water to the dispenser as the water inlet valve still works properly. Hope this helps!
$96.02
On Order
Icemaker Control Assembly
82 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Rudy Burger - For model number 4317943
December 5, 2017
How do i set the water level in my ice maker
Chris Boyle Profile
Hello Rudy, Thank you for your inquiry. The ice maker has an adjustment screw that needs to be turned to set the water level. Remove the cover of the icemaker. The adjustment screw is on the right side of the control module. Turn the screw clockwise to reduce the water level, but no more than 2 complete revolutions. Hope this helps you!
28 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Cameron - For model number Whirlpool ED5HEXNB00
May 1, 2018
My ice maker stopped producing ice. I thought it had to do with the arm not initiating the ice making mechanism, as i believe i tinkered with it a bit and it worked for a little bit more. Also i just realized there is no water coming out of the water dispenser (it has always been pretty low flow, perhaps a filter issue). Any suggestions? Do i just get the replacement ice maker or could the issue have to do with water?
Chris Boyle Profile
Hello Cameron, thank you for your question. It sounds like you may have a water flow issue. If the water is slow to the dispenser, and the icemaker wasn't work, then was tinkered with and worked for a bit more the water may not be coming into the icemaker enough to make the ice. I would suggest replacing the Water Inlet Valve Part Number: W10408179 and perhaps the filter, if it hasn't been changed in a while. If the issue continues with the icemaker, we would recommend testing the icemaker to determine if its an issue with the motor module, which is basically like the timer for the icemaker. It calls for ice, allows the water to freeze, activates the dump cycle then calls for more water. I hope this helps!
13 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Cynthia - For model number ED25DQXAW00
September 16, 2019
Ice maker makes the ice but won’t dispense it. Then it turns the ice in the ice maker to become a solid iceberg. Could this be the points and/or the module? Help!
Chris Boyle Profile
Hello Cynthia, Thank you for the question. I suggest removing the Ice Bin and check it over for any damaged parts. Also make sure there is no ice build up preventing it from dispensing ice. If the parts are all good but the dispenser motor in the ice bin is not working to turn the auger, it may need to be replaced. PartSelect Number PS11739113. Hope this helps!
$347.28
Special Order
Refrigerator Ice Dispenser Kit Motor 120v 60hz
13 people found this instruction helpful.
Was this helpful?
Thank you for voting!
John - For model number KTRA22EMSS04
September 10, 2017
Ice maker does not shut off when arm is lifted
Chris Boyle Profile
Hi John, Thank you for your inquiry. You would have to replace your icemaker to fix this issue. Good luck with your repair.
10 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Terry - For model number jrsd2490t
August 8, 2018
I'm having problems with ice maker or in that area. What tells the water to shut off after it fills tray, is there a sensor in ice maker? The problem is water is not shutting off sometimes and makes a frozen waterfall in freeze (what doesn't hit the hardwood floors) thank you
Chris Boyle Profile
Hi Terry, Thank you for your question. There would be two parts that could cause this issue. It is either the ice maker is calling up too much water, or the water inlet valve is sending up too much water. I would suggest testing your water inlet valve first, to make sure it is not malfunctioning. If that part is fine then it would be your ice maker that is the problem. I hope that helps. Good luck with your repair.
9 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Gerard - For model number 106.57071791
February 26, 2020
Ice maker 4317943 stopped making ice. I get water from dispenser and also when I close the circuit on the module so I think the water valve is ok. The tray and heater are in good shape. The strange thing is if I fill the tray with water eventually it will make cubes. Also the thermostat test ok. I replaced the module and no change. Any thoughts?
Chris Boyle Profile
Hello Gerard, Thank you for the question. The Valve has 2 ports, for the ice maker and the water dispenser. It is possible the Valve could be defective. You can check with a multi meter to see if there is power going to the water valve when the icemaker cycles. Please see the link below for help testing a Water Valve as well. We hope this helps. https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
9 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Cathy - For model number KSCS25FJSS01
January 30, 2018
Hi - the part to my icemaker that guides the water into the dispenser is broken in the sense that the plastic detached from the holder, but I can and have manually put it into its proper place and it continued to work. I think my husband knocked it loose and then water went all over the insides of the freezer. I was worried that something inside was broken because I found a bit of water on the floor. I'm sorry to say i have a very dirty water filter that needs replacing. Could a dirty filter cause a water backup problem? Additionally, the water pan under the refrigerator does not have any water in it, but when I looked in there today, after I had shut off the water supply to the refrigerator, there was something that resembled black dirt in the tray. I wondered if there would be any sort of rubber or spongy material insulating anything that could have crumbled into the tray from being dry or frayed from age? Thanks for any direction with this!
Chris Boyle Profile
Hi Cathy, Thank you for the question. The inlet tube just pushes into place so it may have just been bumped.If you were able to reinsert it and it is working then you will be fine. If the filter needs to be replaced the water flow will be slow or stop and it can cause a leak. The dirt in the tray could just be dirt. The fan helps evaporate the water in the try so it is normal not to see water sitting in the tray.There is no foam or filter in the tray to absorb or insulate. Hope this helps!
8 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Kenneth Miller - For model number whirlpool 4317943
February 10, 2018
How long dose it take this ice maker to fill tub
Chris Boyle Profile
Hello Kenneth, Thank you for your inquiry. It can take about 24 hours for it to start producing ice, and since it usually dumps around every 1-2 hours, it can take 24 to 48 hours to fill the ice bin depending on the side. Hope this helps!
7 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Rudy - For model number PS358591
August 15, 2017
How can i adjust the water into my ice maker?
Chris Boyle Profile
Hello Rudy, that is a great question. The ice maker control board would have a solenoid in it, this controls the water flow to the ice maker to keep it from over flowing. Hope this helps!
7 people found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #4317943
Brand
Model Number
Description
Kenmore
1061105299
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
106482394
Ice Maker
Kenmore
10648562893
Refrigerator
Kenmore
10650022000
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650257000
Refrigerator
Kenmore
10650257001
Refrigerator
Kenmore
10650259001
Refrigerator
Kenmore
10650259002
Refrigerator
Replacement Ice Maker
$190.47
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.