Door Boot Seal - Without Drain Port Specifications
Also known as a bellow.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
LG.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 1, 2018
How do you replace door boot seal?
For model number WM2116CW
Hi David, Thank you for the question. Here is a link to a video on how to replace a boot seal. Hope this helps! https://www.youtube.com/watch?v=tfS_sjd-CxM&t=2s
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
January 2, 2019
Outer boot clamp is rusted and i plan to replace it. I figured i would also replace the entire boot seal at the same time. I've watch videos on the process and there appears to be 2 boot clamps and outer and an inner. I have found the part number for the outer clamp but cannot seem to find the part number for the inner clamp. Is it a separate part of included in the boot seal? Thanks!
For model number WM2016CW
Hello Jerry, thank you for your question. The two clamps are part numbers Clamp Assembly Part Number: PS3524025 and Clamp Assembly Part Number: PS3517812. They are sold separately from the door boot seal. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Leilani
January 18, 2019
My front load washer smells badly and i notice the mold inside the rubber piece is really gross - can this rubber piece be replaced fairly simply? And where do i get the "name" of that part?
For model number WM2016CW
Hi Leilani,
Thank you for your question. The part you are looking for is referred to as either the door boot seal or bellow. The part number listed under your model number for the part is PS3535198. It can take some time to install the part. There is a video on our website that you can reference on how to install the door boot seal. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1766023. Here is a link where you may view the video, https://www.partselect.com/PS1766023-GE-WH08X10036-Door-Boot-Seal.htm?SourceCode=15. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Naseem
April 10, 2019
How many door gasket clamps do I need? One or 2?
For model number LG WM2016CW
Hello Naseem, thank you for your question. There is only one Clamp Assembly listed for your model, part PS3524025.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
October 27, 2019
I see that the door boot gasket for LG model wm2016cw is shown as part # ps3535198 without a drain port. My LG shows model # wm2016 / 01. Does this model # with the /01 distinguish it from the model# without the /01 and the need for a different part with a drain port? I cannot determine on my unit whether it has a drain port or not until i can view the gasket upon disassembling my machine. If it helps here is the serial # 905kwel04064.
For model number WM2016CW / 01
Hello Steve, Thank you for the question. Very sorry but both models list with and without ports, so you would need to check the boot on the appliance to know what option your model requires. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is leaking, and running n...
This bearing, or ball, is a genuine OEM replacement part for your washer. The bearing allows the tub to rotate smoothly. Replacing this part can be helpful if your washer is extremely loud, or vibrates excessively. Somet...
The spider, or rear tub support, is located behind the outer tub of your washer, and provides support to the outer tub. It has 3 legs and each measures approximately 10 inches long. If your washer moves or shakes, or sou...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3535198
Manufacturer Part Number: MDS33059401
