The holder for the lint screen was removed to vacuum lint. It broke when turned on.
I found that the screws that hold it in were a bit too short. After several cleanings I re inserted the screen only to have it dislodge and break. I ordered a new part and after using a drift pin and lamp I found that the screws were too short and the threads needed to secure it were worn. Longer screws solved the problem.
Screw driver, headlight lamp.. a lot of cursing lol it wasn’t too bad I just couldn’t get it in at first
Other Parts Used:
Eliza from HAUSER, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Doesn’t fit
The parts do not fit my dryer. The guide cover is about 1/4 in off. Screws don’t align with the holes. I can get one screw in but than Carly get the other one aligned. Lots of wasted time and frustration.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DEREK
January 8, 2020
I need the replacement for the lint screen assembly housing. However, mine has a sensor that plugs in. None of the replacement models shown have the sensor plugs.
For model number DLG2102W
Hello DEREK and thank you for writing.
The assembly is not available for your model so you would have to order the parts you need individually:
Lint filter PS3527578
Lint filter guide cover PS3519694
Guide PS3524629
Sensor PS3529161
We hope this helps. Please contact us anytime if you require further assistance.
LG Electric Dryer I am trying to replace the guide cover but I need the one in which the sensor fits into the guide cover.
For model number DLE4970W
Hello Patricia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3534930. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is no...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3519694
Manufacturer Part Number: 3550EL1006B
