Drum Front with Seal

Disassembled the washer from the top down more or less. Started with top cover, then control panel then door assembly. After that removed all connections to drum. Removed belt, pulley, and then counterweights. Wires are all on harness with plugs, I took pics as I went for reference as to where they belong. The motor was left plugged in and slides out of the mount at the bottom of the tub after removing one bolt. To remove the door latch assembly, remove the front tub seal first then you can easily access it after you unscrew it. The shocks are a quarter turn release type mechanism. I broke two going back together after trying to lock them into place. Not sure why, maybe age of part had something to do with it, and they are hard to turn as well.