Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
March 27, 2018
Looking to replace part number: Ps3511267 fine filter you stated in the last answer to turn the spray arm counter clock wise this does not remove my spray arm
For model number GSM2200V00WW
Hi Ray, Thank you for contacting us. Very sorry you are correct. On the side of the base of the arm there is a tab you will need to pry outwards a bit with a small flat head screw driver to release the spray arm. It is off to the side on the back side so it is not easily seen. You may have to feel around to locate the tab. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
March 27, 2018
How do I replace part GE wd12x10357 filter fine
For model number GSM2200V00WW
Hi Ray, Thank you for the question. You will need to remove the bottom spray arm by turning it counter clockwise and then pull the filter straight up to remove it. Hope this helps!
Was this helpful?
Thank you for voting!
Joe
November 18, 2022
When putting on part#wd12x10357 filter fine asm, is it supposed to look like it sits crooked.
For model number Gsd2100v55ww
Hello Joe, thank you for your question. To Remove the filter : On the side of the base of the arm there is a tab you will need to pry outwards a bit with a small flat head screw driver to release the spray arm. So, it can be reasoned that when reinstalling it, it may be tricky to snap it back into place. It should not be ill-fitting. We hope this information will help you.
Was this helpful?
Thank you for voting!
MICHAEL
September 8, 2023
I am having the problem with water not draining. I have replaced the Drain Solenoid and Bracket Assembly and it seems the original one was working. I have also replaced the Pump and Motor Assembly which also seems to be working without defect. When I put it all back together I noticed an orange ball floating in the area where the FILTER FINE Assembly attached to the SUMP INLET. Was that supposed to be there and if so where does it go. I did not see it until I removed the Filter Fine Assembly. And I still have the problem with it not draining. The hose is clear also.
For model number GSD3300D35BB
Hi Michael, thank you for the question. It appears that your washer may have a damaged timer control, part number PS6011664, and it needs to be replaced. The orange floating ball that you mentioned goes into the inlet sump. It blocks the path to the fine filter during the drain cycle. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Elizabeth
May 17, 2024
Do I need to replace the filter assembly or can you buy a replacement filter
For model number GSD4000D35BB
Hello Elizabeth, thank you for reaching out. The filter for your model only comes as a part of the filter assembly, part number PS3511267. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This coupler, also known as a hose connector, is made of white plastic and is about one inch in height, and just over one inch in length. Replacing the coupler is a fairly easy repair. The hardest part of the repair is a...
This is a replacement lower wash arm assembly for your dishwasher. The lower spray arm is mounted to the bottom of your dishwasher tub and will rotate and spray water during the wash cycle. The spray arm has small holes ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3511267
Manufacturer Part Number: WD12X10357